🚀 go-pugleaf

I'm running RHL6.1 and the 7200e runs fine for me (I just can't get it
to write and xcdroast doesn't work for me).  Anyways the device is
actually /dev/pcd0.  So it'd be:

mount /dev/pcd0 /mnt/cdrw

If that doesn't work, let me know.  I have a script that runs at boot
that loads the proper modules in order.  I can email it to you later if
you want.


silkythreads wrote:
> 
> I have MANDRAKE 7.0, Kernel 2.2.14-15mdk installed.
> 
> Everything works EXCEPT .......my HP 7200e (that;'s external)
> 
> I've tried it, it does not work.  Only my scsi cdrom responds.
> 
> Here's my story ......
> 
> Internal hardware:
> 
> hda:    Maxtor 91360D9, ATA DISK drive
> hdb:    WDC AC33100H, ATA DISK drive
> hdc:    LS-120 CSMO 05 UHD Floppy, ATAPI FLOPPY drive
> 
> I have internal SCSI installed
> 
> scsi id 5    PLEXTOR CD-ROM PX-32TS  -   This is my primary CDROM
> scsi id 6    IBM DCAS-34330W -  This is my primary HARDDRIVE  (2 parts -
> sda1, sda5)
> 
> parport is installed.  I have an external HP 694C printer on the end of
> my
> parallel port chain.
> 
> My HP 7200e is in between the computer and printer.
> 
> I can not get my computer to recognize my cdrw.
> 
> I've tried "mount -t iso9660 /dev/scd0 /mnt/cdrw"
> And it only re-mounts my primary cdrom, which of course is now mounted
> twice.
> (Actually, I tried everything I've read and more than I wanted too.)
> 
> I keep thinking that if the CDRW requires ide-scsi support, I should try
> 
> and make my scsi adapter see it, to define an ID for it.
> 
> HELP !!  I CAN NOT GET THIS TO WORK, and I'll bet it's something
> SO SIMPLY !!


-- 

Joe Tseng
joe_tseng at hotmail dot com | jtseng at tux dot org
2404625291 at messaging dot sprintpcs dot com

"Bill Gates and Linus Torvalds Meet in Airport; Thousands Killed in
Resulting Explosion. News at 11."
Go 1999 UMD Basketball (17-6, #22 ESPN/USAToday)