🚀 go-pugleaf

----- Original Message -----
From: "Lars Br�uer" <lars@tcpip-gmbh.de>
Newsgroups: alt.os.linux.suse,creative.products.sound_blaster.live
Sent: Wednesday, July 26, 2000 12:03 PM
Subject: Re: alsa/emu10k1 - sound doesn't work


> I missed something. my modules.conf looks like this:
>
> alias sound emu10k1
> pre-install emu10k1 insmod soundcore
> post-remove emu10k1 rmmod soundcore
>
> Lars Br�uer wrote:
>
> > ok, here's my problem (short version ;):
> > sound doesn't work after "reinstalling" alsa
> >
> > my system:
> > SuSE 6.4
> > Creative Soundblaster Live!
> > Kernel: 2.2.14 (sound loaded as module)
> >
> > sound used to work fine. I thought it might be better to clean up the HD
> > a bit by removing several (tons) of packets using yast. unfortunately I
> > removed the alsa and emu packets. sound didn't work (of course) after
> > rebooting. I figured out that it hasn't been a good idea to remove the
> > alsa packet, so I reinstalled it using yast.
> >
> > after rebooting again sound still won't work. when using yast2 to setup
> > sound I get a message like "can't find module 'snd-card-emu10k1'... so I
> > found that module on the suse cds and installed it using the script
> > "install_emu10k1".
> >
> > I still get the message that snd-card-emu10k1 is missing, although it's
> > installed.
> >
> > maybe anybody has a solution for that !?
> >
> > ps: when using the open sound system (opso) driver, sound is working
> > fine, but the opso is limited to 20 minutes, so that is not a good
> > alternative.
> >
> > please tell me if you need any additional information (logs, outputs,
> > etc) to help me with this problem.
> >
> > thanks in advance.
> >
> > lars
>
Actually, the emu package and the alsa package are independent. you should
decide to use one of that. If you use alsa, which I recommend, you simpl
install the package and run the alsa-config script on a console or xterm.