🚀 go-pugleaf

In your log I do not see the sign in sequence.
Usually you need to get authenticated before you  start PPP


Adrian Cumiskey wrote:
> 
> Hi all,
> 
> I am running a SuSe 7.0 system (2.2.16 kernel).  I have just returned back
> to the UK from Germany where I was happily enjoying an ISDN PPP (IPPP)
> connection to my ISP.  But now I've returned back to the UK, I've switched
> to using a standard US Robotics analogue modem.  It connects fine on Win32
> but fails in negotiation on my Linux system.  SuSe uses wvdial as dialup
> tool, below is the output from wvdial and /var/log/messages.
> 
> --------------------------------------------------------------------------
> wvdial
> --------------------------------------------------------------------------
> 
> --> WvDial: Internet dialer version 1.41
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> OK
> --> Modem initialized.
> --> Idle Seconds = 180, disabling automatic reconnect.
> --> Sending: ATDT08456621098
> --> Waiting for carrier.
> ATDT08456621098
> CONNECT 46666/ARQ
> --> Carrier detected.  Starting PPP immediately.
> --> Starting pppd at Sun Jun 24 20:44:52 2001
> --> pid of pppd: 615
> --> Disconnecting at Sun Jun 24 20:45:01 2001
> --> The PPP daemon has died: A modem hung up the phone (exit code = 16)
> --> man pppd explains pppd error codes in more detail.
> --> Try again and look into /var/log/messages and the wvdial and pppd
> --> man pages for more information.
> 
> --------------------------------------------------------------------------
> /var/log/messages
> --------------------------------------------------------------------------
> 
> Jun 24 20:44:53 crunchie pppd[615]: Plugin /usr/lib/passwordfd.so loaded.
> Jun 24 20:44:53 crunchie kernel: Cronyx Ltd, Synchronous PPP and CISCO HDLC
> (c) 1994
> Jun 24 20:44:53 crunchie kernel: Linux port (c) 1998 Building Number Three
> Ltd & Jan "Yenya" Kasprzak.
> Jun 24 20:44:54 crunchie kernel: CSLIP: code copyright 1989 Regents of the
> University of California
> Jun 24 20:44:54 crunchie kernel: PPP: version 2.3.7 (demand dialling)
> Jun 24 20:44:54 crunchie kernel: PPP line discipline registered.
> Jun 24 20:44:54 crunchie kernel: registered device ppp0
> Jun 24 20:44:54 crunchie pppd[615]: pppd 2.4.0 started by root, uid 0
> Jun 24 20:44:54 crunchie pppd[615]: Perms of /dev/ttyS0 are ok, no 'mesg n'
> neccesary.
> Jun 24 20:44:54 crunchie pppd[615]: Using interface ppp0
> Jun 24 20:44:54 crunchie pppd[615]: Connect: ppp0 <--> /dev/ttyS0
> Jun 24 20:44:54 crunchie pppd[615]: sent [LCP ConfReq id=0x1 <asyncmap 0x0>
> <magic 0xcea38803> <pcomp> <accomp>]
> Jun 24 20:45:00 crunchie last message repeated 2 times
> Jun 24 20:45:00 crunchie pppd[615]: Hangup (SIGHUP)
> Jun 24 20:45:00 crunchie pppd[615]: Modem hangup
> Jun 24 20:45:00 crunchie pppd[615]: Connection terminated.
> Jun 24 20:45:00 crunchie pppd[615]: Exit.
> 
> --------------------------------------------------------------------------
> 
> I don't seem to be receiving acknowledgment for my LCP ConfReq, which to me
> means I am sending an invalid ConfReq or I am failing to recognise an
> acknowledgment.  This is not an ISP problem because I have tried connecting
> to different providers.  So I'm thinking maybe its a configuration problem I
> have.  I have not upgraded my kernel as yet so I'm still using the default
> module build.  If anybody has else has had similar problems, or can advise
> me on different things that I can try then please reply.
> 
> Please help!
> 
> Adrian Cumiskey.