🚀 go-pugleaf

Hallo,
ich m�chte mit Windows 9x und NT Clients auf einen Linux-Rechner
(Suse 6.2 mit einer AVM Fritz! Classic) per ISDN zugreifen, CHAP verwenden
und Callback machen. Leider komme ich mit den How-To�s nicht mehr weiter und
bei den Windows-Kisten weiss ich nicht wie ich das DF�-Netzwerk
konfigurieren mu� damit die sich "verstehen". Ich w�rd mich auch erstmal mit
PAP und ohne Callback begn�gen. Was mach ich falsch ?????????

Hier Ausz�ge aus /etc/log/messages

...
Feb 10 17:53:07 oslo kernel: isdn_net: call from 736XXXX,7,0 -> 12
Feb 10 17:53:07 oslo kernel: ippp0: call from 736XXXX -> 12 accepted
Feb 10 17:53:07 oslo isdnlog: Feb 10 17:53:07 * Call to tei 127 from +49
736XXXX, XXXX on +49 736XXX, XXXX RING (Data)
Feb 10 17:53:07 oslo isdnlog: Feb 10 17:53:07   Call to tei 118 from +49
736XXXX, XXXX on +49 73XXXX, XXXX  CONNECT (Data)
Feb 10 17:53:07 oslo ipppd[1875]: Local number: 12, Remote number: , Type:
incoming
Feb 10 17:53:07 oslo ipppd[1875]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit:
0, linkunit: 0, fd: 11
Feb 10 17:53:07 oslo kernel: isdn_net: ippp0 connected
Feb 10 17:53:07 oslo kernel: isdn_net: chargetime of ippp0 now 577867
Feb 10 17:53:07 oslo isdnlog: Feb 10 17:53:07 tei 117 calling ? with ?
Time:Thu Feb 10 17:50:00 2000
Feb 10 17:53:07 oslo isdnlog: Feb 10 17:53:07 tei 117 calling ? with ?
CONNECT
Feb 10 17:53:10 oslo ipppd[1875]: peer refused to authenticate
Feb 10 17:53:10 oslo ipppd[1875]: Connection terminated.
Feb 10 17:53:10 oslo ipppd[1875]: taking down PHASE_DEAD link 0, linkunit: 0
Feb 10 17:53:10 oslo ipppd[1875]: closing fd 11 from unit 0
Feb 10 17:53:10 oslo ipppd[1875]: link 0 closed , linkunit: 0
Feb 10 17:53:10 oslo ipppd[1875]: reinit_unit: 0
Feb 10 17:53:10 oslo ipppd[1875]: Connect[0]: /dev/ippp0, fd: 11
Feb 10 17:53:10 oslo kernel: isdn_net: local hangup ippp0
Feb 10 17:53:10 oslo kernel: ippp0: Chargesum is 0
Feb 10 17:53:10 oslo kernel: ippp, open, slot: 0, minor: 0, state: 0000
Feb 10 17:53:10 oslo kernel: ippp_ccp: allocating reset data structure
Feb 10 17:53:10 oslo isdnlog: Feb 10 17:53:10   Call to tei 118 from +49
736XXX, XXXX on +49 736XXX, XXXX  Normal call clearing (User)
Feb 10 17:53:11 oslo isdnlog: Feb 10 17:53:11   Call to tei 118 from +49
736XXX, XXXX on +49 736XXX, XXXX  HANGUP ( 0:00:03 I=  0.0 b O= 22.0 b)
Feb 10 17:53:11 oslo isdnlog: Feb 10 17:53:11 tei 117 calling ? with ?
Normal call clearing (User)
Feb 10 17:53:11 oslo isdnlog: Feb 10 17:53:11 tei 117 calling ? with ?
HANGUP (1 EH DEM  0.120  0:00:04)
...

und aus /etc/ppp/options.ippp0

# The device(s)
# for more than one device try:
# /dev/ippp0 /dev/ippp1 ...
/dev/ippp0

# The IP addresses: <local>:<remote>
# just "0.0.0.0:" or nothing for dynamic IP
10.0.0.121:10.0.0.122

# my user name
user "<username>"

# my system name (only for CHAP!)
# name my_system_name

# accept IP addresses from peer
# use with dynamic IP
# ipcp-accept-local
# ipcp-accept-remote
# noipdefault

# try to get IP address from interface
# option specific to ipppd (as opposed to pppd)
# use only with static IP
useifip

# disable all header-compression
-vj
-vjccomp
-ac
-pc
-bsdcomp

# sometimes you need this:
#noccp

# max receive unit
mru 1524
# max transmit unit
mtu 1500

# If this machine is a server, force authentication by uncommenting one
# of the following. However, if this machine is a client, doing this will
# prevent a succesful connection! (message "peer refused to authenticate").
# So, only uncomment on a server.
# "+pap" / "+chap" NUR AKTIVIEREN, WENN DIES EIN SERVER IST!!!
+pap
#+chap

# if you have problems with handshaking (no response for first
# lcp-package) try to decrease the retry-cycle. Default is 3 sec,
# try for example 2 sec:
# lcp-restart 2

So jetzt hab ich ziemlich viel geschrieben und gepastet, ich hoffe nicht
zuviel.
Vielleicht kann mir ja jemand helfen.

W�re nett
CU
Frank Weberbauer