🚀 go-pugleaf

This is a multi-part message in MIME format.

------=_NextPart_000_0025_01BF626C.35DC8E20
Content-Type: multipart/alternative;
	boundary="----=_NextPart_001_0026_01BF626C.35DC8E20"


------=_NextPart_001_0026_01BF626C.35DC8E20
Content-Type: text/plain;
	charset="Windows-1252"
Content-Transfer-Encoding: 7bit

Ja also empfang funktioniert (scheinbar) einwandfrei...
nur beim senden bekomme ich die Meldung Jan 18 23:11:10.85:
[ 2074]: REMOTE
HANGUP: Unspecified Transmit Phase B error (code 20).....
((siehe Anlage.))

In der SDB steht was drin aber das hilft nicht.

Ich benutze ein Creatix Modem (1&1) und Suse 6.2

BITTE HELFT MIR...




DANKE PUK














------=_NextPart_001_0026_01BF626C.35DC8E20
Content-Type: text/html;
	charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Dwindows-1252" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2614.3500" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY><FONT face=3DArial size=3D2>Ja also empfang funktioniert =
(scheinbar)=20
einwandfrei...<BR>nur beim senden bekomme ich die Meldung Jan 18 =
23:11:10.85: [=20
2074]: REMOTE<BR>HANGUP: Unspecified Transmit Phase B error (code=20
20).....<BR>((siehe Anlage.))<BR><BR>In der SDB steht was drin aber das =
hilft=20
nicht.<BR><BR>Ich benutze ein Creatix Modem (1&amp;1) und Suse =
6.2<BR><BR>BITTE=20
HELFT MIR...<BR><BR><BR><BR><BR>DANKE=20
PUK<BR><BR><BR><BR><BR><BR><BR><BR><BR><BR><BR><BR><BR></FONT></BODY></HT=
ML>

------=_NextPart_001_0026_01BF626C.35DC8E20--

------=_NextPart_000_0025_01BF626C.35DC8E20
Content-Type: text/plain;
	name="c00000015 (1).txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="c00000015 (1).txt"

Jan 18 23:10:45.07: [ 2074]: SESSION BEGIN 00000015 59751
Jan 18 23:10:45.07: [ 2074]: SEND FAX: JOB 9 DEST 59751 COMMID 00000015
Jan 18 23:10:45.07: [ 2074]: MODEM set DTR OFF
Jan 18 23:10:45.07: [ 2074]: DELAY 2600 ms
Jan 18 23:10:47.67: [ 2074]: MODEM set DTR ON
Jan 18 23:10:47.68: [ 2074]: MODEM set baud rate: 9600 baud, input flow =
RTS/CTS, output flow RTS/CTS
Jan 18 23:10:47.68: [ 2074]: MODEM flush i/o
Jan 18 23:10:47.69: [ 2074]: <-- [15:ATE0V1Q0S0=3D0H0\r]
Jan 18 23:10:47.85: [ 2074]: --> [2:OK]
Jan 18 23:10:47.85: [ 2074]: <-- [21:ATS8=3D2S7=3D60&K3&D3&C1\r]
Jan 18 23:10:48.03: [ 2074]: --> [2:OK]
Jan 18 23:10:48.03: [ 2074]: <-- [12:AT+FCLASS=3D2\r]
Jan 18 23:10:48.20: [ 2074]: --> [2:OK]
Jan 18 23:10:48.20: [ 2074]: <-- [10:AT+FTBC=3D0\r]
Jan 18 23:10:48.37: [ 2074]: --> [2:OK]
Jan 18 23:10:48.37: [ 2074]: <-- [10:AT+FBOR=3D0\r]
Jan 18 23:10:48.54: [ 2074]: --> [2:OK]
Jan 18 23:10:48.54: [ 2074]: <-- [13:AT+FPHCTO=3D30\r]
Jan 18 23:10:48.71: [ 2074]: --> [2:OK]
Jan 18 23:10:48.71: [ 2074]: <-- [24:AT+FDCC=3D1,5,2,2,1,0,0,0\r]
Jan 18 23:10:48.89: [ 2074]: --> [2:OK]
Jan 18 23:10:48.89: [ 2074]: <-- [7:ATL0M1\r]
Jan 18 23:10:49.05: [ 2074]: --> [2:OK]
Jan 18 23:10:49.05: [ 2074]: MODEM input buffering enabled
Jan 18 23:10:49.06: [ 2074]: <-- [12:AT+FCLASS=3D2\r]
Jan 18 23:10:49.33: [ 2074]: --> [2:OK]
Jan 18 23:10:49.33: [ 2074]: <-- [10:AT+FTBC=3D0\r]
Jan 18 23:10:49.60: [ 2074]: --> [2:OK]
Jan 18 23:10:49.60: [ 2074]: <-- [10:AT+FBOR=3D0\r]
Jan 18 23:10:49.87: [ 2074]: --> [2:OK]
Jan 18 23:10:49.87: [ 2074]: <-- [13:AT+FPHCTO=3D30\r]
Jan 18 23:10:50.14: [ 2074]: --> [2:OK]
Jan 18 23:10:50.14: [ 2074]: <-- [24:AT+FDCC=3D1,5,2,2,1,0,0,0\r]
Jan 18 23:10:50.42: [ 2074]: --> [2:OK]
Jan 18 23:10:50.42: [ 2074]: <-- [18:AT+FLID=3D"Brandel"\r]
Jan 18 23:10:50.70: [ 2074]: --> [2:OK]
Jan 18 23:10:50.72: [ 2074]: DIAL 59751
Jan 18 23:10:50.73: [ 2074]: <-- [10:ATDT59751\r]
Jan 18 23:11:06.83: [ 2074]: --> [5:+FCON]
Jan 18 23:11:10.12: [ 2074]: --> [29:+FCSI: "+49 6222 59721      "]
Jan 18 23:11:10.12: [ 2074]: REMOTE CSI "+49 6222 59721"
Jan 18 23:11:10.46: [ 2074]: --> [22:+FDIS: 1,3,0,2,1,0,0,4]
Jan 18 23:11:10.57: [ 2074]: --> [2:OK]
Jan 18 23:11:10.57: [ 2074]: REMOTE best rate 9600 bit/s
Jan 18 23:11:10.57: [ 2074]: REMOTE max page width 1728 pixels in 215 mm
Jan 18 23:11:10.58: [ 2074]: REMOTE max unlimited page length=20
Jan 18 23:11:10.58: [ 2074]: REMOTE best vres 7.7 line/mm
Jan 18 23:11:10.58: [ 2074]: REMOTE best format 2-D MR
Jan 18 23:11:10.58: [ 2074]: REMOTE best 20 ms, 10 ms/scanline
Jan 18 23:11:10.58: [ 2074]: USE 9600 bit/s
Jan 18 23:11:10.58: [ 2074]: USE 20 ms, 10 ms/scanline
Jan 18 23:11:10.59: [ 2074]: <-- [5:ATH0\r]
Jan 18 23:11:10.85: [ 2074]: --> [9:+FHNG: 20]
Jan 18 23:11:10.85: [ 2074]: REMOTE HANGUP: Unspecified Transmit Phase B =
error (code 20)
Jan 18 23:11:11.42: [ 2074]: --> [2:OK]
Jan 18 23:11:11.42: [ 2074]: MODEM set DTR OFF
Jan 18 23:11:11.43: [ 2074]: SESSION END

------=_NextPart_000_0025_01BF626C.35DC8E20--