Printing from Font Navigator 3.0

Thread View: alt.soft-sys.corel.draw

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Victor Mon, 08 Dec 1997 00:00

#18

Author: Victor
Date: Mon, 08 Dec 1997 00:00

11 lines
1034 bytes

I recently upgraded to CorelDraw 8 and installed Bitstream Font Navigator
3.0 in the process. Everything seems to be working fine cept that I can
print any samples of the fonts. Seems to print the spool..but nothing ever
comes out of the printer. I'd assume it was a printer problem; but I don't
have trouble printing from any other application.

Since CorelDraw 8 is such a recent upgrade, has anyone else tried printing
fonts samples from Bitstream Font Navigator 3.0

Victor

Re: Printing from Font Navigator 3.0

#19

Author: Foster D. Coburn III
Date: Thu, 11 Dec 1997 00:00

17 lines
1200 bytes

<<Since CorelDraw 8 is such a recent upgrade, has anyone else tried
printing
fonts samples from Bitstream Font Navigator 3.0>>

I've printed samples from Font Navigator without any problems.

If  you are printing a page with lots of different fonts, you may be
overloading your printer's memory and thus the problem. Anything more
than 6 to 8 fonts on a page COULD cause the problem depending on the
printer model and installed RAM.

--
Foster D. Coburn III
Unleashed Productions, Inc.
http://www.unleash.com -- The Ultimate Resource for the Graphics User
Tips & Tricks, Training Classes, Books, Videos and much more

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads