Couldn't contact X server - error - Article 4 - go-pugleaf

Article View: alt.soft-sys.tooltalk

Article #4

Back to alt.soft-sys.tooltalk Previous Next

Couldn't contact X server - error

From: Bjarne.Nordberg
Date: Thu, 30 Jul 1992 07:57

26 lines
1228 bytes

Always when I run my ToolTalk applications, they print out the
message:

Couldn't contact X server

after registering or sending messages.
I am only running locally on one machine, although I'm connected
to a large network.

It takes very long time (25-30s), to send a tt message with this bug.
Sometimes these lines go with it:

Xlib:  connection to "134.138.8.59:0.0" refused by server
Xlib:  Client is not authorized to connect to server

There is no delay in this case.

It appears to be some configuration information regarding tt which
is not maintained properly (old info not erased).

- Does anyone have a fix or workaround for this problem?

--
Bjarne Nordberg (Bjarne.Nordberg@eua.ericsson.se)
Ellemtel AB           ..   ..
PO Box 1505, S-125 25 ALVSJO, Sweden

Technical Details

Message-ID: <1992Jul30.075728.28453@eua.ericsson.se>

Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!sunic!sics.se!eua.ericsson.se!euabin

Show Full Headers

Complete Article Headers

Newsgroups: alt.soft-sys.tooltalk
Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!sunic!sics.se!eua.ericsson.se!euabin
From: euabin@eua.ericsson.se (Bjarne.Nordberg)
Subject: Couldn't contact X server - error
Message-ID: <1992Jul30.075728.28453@eua.ericsson.se>
Sender: news@eua.ericsson.se
Nntp-Posting-Host: euas20.eua.ericsson.se
Organization: Ellemtel Telecom Systems Labs, Stockholm, Sweden
Date: Thu, 30 Jul 1992 07:57:28 GMT
Lines: 26