🚀 go-pugleaf

Archive-name: kehpager0110/patch3.0-rmf
Author: Kari E. Hurtta <Kari.Hurtta@Helsinki.F>
Product: kehpager - Charset aware pager
Version: 1.13
Patch-to: 1.12
Environment: Ansi C (gcc, HP's cc, SUN's acc), SunOS 4, SunOS 5, HP-UX

[Ok. I screwed with README. There comes new version. ]

#!/bin/sh
cat >Patch3.README-fixed <<'EOM'
This patch updates kehpager V1.12 to kehpager V1.13

Changes to version 1.12:
	Now pagebreaks are interpreted (FF -characters and <np> -command 
	  int Text/richtext). Handling of pagebreaks is perhaps extraordinary.
	  You like it or not. You can prevent splitting of message to pages
	  with option -pm or with
		input.pagemode: Disabled
	  You can toggle this mode on/off with command P
	Updating of screen is tried optimize yet more ('lazy update').
	You can use option -- to prevent filenames with starting of - to 
          interpreted as options. This also prevents - to be interpreted as
	  standard input.
	Kehpager now reads $COLUMNS and $LINES. You can prevent reading
	  of these environment variables with
		env.size: Disabled
	  (terminal driver's idea of terminal size is still preferred.)
	Kehpager now tests terminal's size with same way as 'resize' does.
	  You can prevent this testing with option -rs or with
		use.query_size: Disabled
          Terminal's size if taken from (from last significant to
		most significant):
		1) use.terminal.lines, use.terminal.columns
		2) $LINES, $COLUMNS
		3) terminal driver
		4) 'resize' method
	To Text/Enriched have following changes:
	  - Updated it according of RFC1563 (previous version of specification
		was RFC1523):
	    * <FlushBoth> added (that is full justification - in previous
		version of Text/enriched that was default)
	    * Initial state of justification is now allowed to be any of
		<FlushLeft>, <FlushRight> or <FlushBoth>
	      Because kehpager don't handle very well full justification,
		I changed default state to <FlushLeft> (from <FlushBoth>).
		You can return full justification by option j+ or with
			input.full_justify: Enabled
	  - Kehpager now ignores newline which follows <Nofill> or <Verbatim>.
	    This violates RFC1563. You can disable this with option -nl 
	    or with
		input.ignore_nl: Disabled
	    This allows to write 
		<Verbatim>
		lines...
		</Verbatim>
	    instead of
		<Verbatim>First line
		lines...
		</Verbatim>
	You can now bind Ctrl-space key (NUL character)
	Kehpager now support rc -shell with option -e. Also matching of
	  $SHELL is now done more carefully. Option -erc forces rc -shell's
	  syntax to be used (as in -e option).
	TABing step can now change interactively with command a
	  (I'm sory, but command t and T is already reserved)
	Indentation step can now change interactively with command i
	  (thats affect <Indent> and <IndentRight> commands).
	Added some support for NetBSD (and perhaps for FreeBSD and 386BSD)
	  (from Jörg Wunsch <joerg_wunsch@tcd-dresden.de>)
          but I don't have finished that yet.
	New options: -erc, -pm, -pm+, --, -nl, -nl+, -rs, -rs+
	New init file fields: keyboard.toggle_pagemode, input.pagemode,
	  keyboard.tab_step,keyboard.tab_step.self_insert,
	  keyboard.tab_step.enter, keyboard.indent_step,
	  keyboard.indent_step.self_insert, 
          keyboard.indent_step.enter, env.size, input.ignore_nl,
          exit.newline, use.query_size
	Some bug fixes

Installation
SunOS 4:
	Run Patch3.sh
	Set correct value for use.keyboard.language -field in
		kehpager.init (you can also comment it out if your
		terminals is inteelligent enough). You probably also
	 want add
	   use.vt100.national_available: Enabled
	 to kehpager.init (this was default prior version 1.06).
	Copy kehpager.init to library direction
	Edit Makefile and put defination of GLOBAL_INIT_FILE
	  point correct location of kehpager.init
	  Also select correct compiler (gcc, or SUN's acc (ANSI C version))
	  to Makefile's define.
	Compile it with
		make sunos4
	Copy kehpager and kehpager.1 to correct directories
SunOS 5:
	Run Patch3.sh
	Set correct value for use.keyboard.language -field in
		kehpager.init (you can also comment it out if your
		terminals is intelligent enough). You probably also
	 want add
	   use.vt100.national_available: Enabled
	 to kehpager.init (this was default prior version 1.06).
	Copy kehpager.init to library direction
	Edit Makefile and put defination of GLOBAL_INIT_FILE
	  point correct location of kehpager.init
	  Also select correct compiler (gcc, or SUN's acc (ANSI C version))
	  to Makefile's define. 
	  Notice that I haven't compiled kehpager with acc on SunOS 5 !!
	    (so perhaps it don't compile...)
	Compile it with
		make sunos5
	Copy kehpager and kehpager.1 to correct directories
HP-UX:
	Run Patch3.sh
	Set correct value for use.keyboard.language -field in
		kehpager.init.hpux (you can also comment it out if your
		terminals is intelligent enough). You probably also
	 want add
	   use.vt100.national_available: Enabled
	 to kehpager.init.hpux (this was default prior version 1.06).
	Copy kehpager.init.hpux to library direction
	Edit Makefile.hpux and put defination of GLOBAL_INIT_FILE
	  point correct location of kehpager.init.hpux
	  Also select correct compiler (gcc, or HP's cc (ANSI C version))
	  to Makefile.hpux's define.
	Compile it with
		make -f Makefile.hpux
	Copy kehpager and kehpager.1 to correct directories
NetBSD: 
	NetBSD port isn't yet finished. Don't expect that to work or
	  even compile!
      To adventurous people:
	Run Patch3.sh
	Set correct value for use.keyboard.language -field in
		kehpager.init (you can also comment it out if your
		terminals is intelligent enough). You probably also
	 want add
	   use.vt100.national_available: Enabled
	 to kehpager.init (this was default prior version 1.06).
	Copy kehpager.init to library direction
	Edit Makefile.bsd and put defination of GLOBAL_INIT_FILE
	  point correct location of kehpager.init
	  Also select correct compiler (gcc, or some other ANSI C compiler)
	  to Makefile.bsd's define.
	Compile it with
		make -f Makefile.bsd
	Copy kehpager and kehpager.1 to correct directories


Tested platforms:
	Kehpager works on SunOS 4.1, 5.2, 5.3, HP-UX A.09

Compiler:
	Kehpager is compiled with gcc in all platforms (expect in *BSD !!).
	In HP-UX it is also compiled with cc (ANSI C version)
		(notice that ANSI C version of cc isn't bundled with HP-UX).
	In SunOS 4 it is also compiled with acc (SUN's ANSI C compiler)
		(notice that ANSI C compiler isn't bundled with SunOS 4).
	Kehpager compiles without error or warning messages 

THANK TO:
	Jörg Wunsch <joerg_wunsch@tcd-dresden.de>

EOM
exit 0

--
- K E H                                      /  Elämä on monimutkaista
  Kari.Hurtta@Helsinki.FI