🚀 go-pugleaf

In article <36de6ced.0@duster.adelaide.on.net>, goble@kin.on.net (David.
E. Goble) wrote:

> Hi All;
> 
> I have installed a copy of MacComCenter onto a Mac SE 30 (v1.2.?) and
> a Powerbook 1400cs (v1.3.8). Both have the default settings.
> 
> I managed to be able to send quick faxes to a 486 from the Mac SE 30.
> 
> A friend tried to fax to the Mac SE 30, it seemed to have been
> received but it could not be found.
> 
> I tried to fax to the Mac SE 30 from the Powerbook same problem, could
> not find the faxed file.
> 
> I tried to fax from the Mac SE 30 to the Powerbook, but the Powerbook
> showned to answer the call, but then frozze with only the cursor able
> to move.

If possible you should upgrade to v3.0. The faxed file should be found in
the 'In box' in the MessageCenter.

You didn't state what system software or Ram you have in either computer.
It's hard to tell what's going on in either computer without that
information. It could be that you are running low on memory, that the
modem doesn't like the software or that you have a extension conflict.

matcon
Remove "spam" from E-Mail Address to reply.