🚀 go-pugleaf

Hi the data to help you is at:
1.
http://vcmprocr.compaq.com/pdf/us_con_pdf/tech/tech/index.html
2.
http://www.compaq.com/athome/support/msgs/2200/models1.html
From 2 it would seem that 2260, 62, 64 and 66 have the same board.
Site 1, has system board jumper settings for AMD and MX chips.

These sites in particular 1, are US modle based, but from Site 2 one
can find a comparable model in this case 2264.

"public" <atoceg@bigpond.com> wrote in message
news:23Gd7.4127$Xa4.19069@newsfeeds.bigpond.com...
> Hi,
>
> I am trying to find out some information on my Compaq 2262 desktop
so that I
> can work out how to upgrade the CPU.  As yet I have not found any
> information on the motherboard.
>
> Current config:
>     Cyrix 6x86 @ 233MHz
>     I think this runs at a core voltage of 2.8v
>
> Proposed config
>     AMD K6-2 @ 500MHz
>     I think this needs between 2.2 and 2.4 core voltage
>
> The motherboard has no information printed on it, but it does have 2
sets of
> 3 jumpers.  The first are labelled FRE00, FRE01, FRE02.  The second
are
> labelled CLK0, CLK1, CLK2.  I am hoping that the FRExx jumpers set
the core
> voltage and the CLKx jumpers set the CPU speed multiplier.
>
> Does anyone know anything about this motherboard or know where I can
find
> some detailed technical information?  The Compaq web site does not
have any
> info. and the service center people couldn't help me!
>
> PS: please reply with e-mail (and to the newsgroup if you want to).
>
>
> Thanks
> Ty Newton
>
>