🚀 go-pugleaf

How about going to DELL.com and just entering your serial number.?
It will show you your config as it was sold.
Or call them up and ask.
Or try the dell newsgroup (which I included in the header)

bobb

"Phred" <ppnerkDELETETHIS@yahoo.com> wrote in message
news:be6olb$1r03q$1@ID-151056.news.dfncis.de...
> In article <AKpNa.855$s_5.5501@news-server.bigpond.net.au>,
> cards <cards@homelinux.org> wrote:
> >ppnerkDELETETHIS@yahoo.com (Phred) writes:
> >>Damn!  I was assuming I could just open up my Dell Dimension 4100 and
> >>look at the current 128MB DIMM to see what sort I would need to
> >>upgrade the memory!  :-(
> >
> >>The specs don't seem to mention "sidedness", just that it needs PC133
> >>CL3 non-ECC SDRAM to 256MB max per slot (i.e. 512MB max total).
> >
> >Do what I did. Take the stick out of the machine and go to the shop.
>
> Would be a good idea, except the "shops" around here are few and far
> between, and typically charge 50% more for things than reliable mail
> order places like EYO (or else sell crap unbranded junk at 25% more).
> So "taking it to the shop" is not very practical when the shop is 1000
> or 1500 miles away.  :-(
>
> >Make sure you get the right kind of memory [i.e. fitting the slot,
> >DDR or ECC] and the right size. The 'sidedness' is not important, but
> >larger sizes are all double-sided.
>
> Thanks for your interest.
>
>
>
> Cheers, Phred.
>
> --
> ppnerkDELETE@THISyahoo.com.INVALID
>