Article View: alt.sys.sun
Article #901Re: 3/260 workstation help needed
From: Craig Dewick
Date: Mon, 06 May 1996 00:00
Date: Mon, 06 May 1996 00:00
88 lines
3077 bytes
3077 bytes
In <4m6b9q$t9b@huron.eel.ufl.edu> afn41813@afn.org (Philip B. Beltz) writes:
>I just picked up a sun 3/260 unit. I need a little help with the
>following. I need to figure out the keyboard port (15 pins) what pins go
>to the key board and what pins go to the mouse.
Ok, with Sun keyboards that I've dealt with (type 3's and type 4's), there
is one cable going between the keyboard and CPU board. There's a seperate
cable from the keyboard to the mouse.
On type 3 keyboards, the cable from the keyboard to CPU board is fixed to
the keyboard, and has a male 15-pin 'D' plug for the CPU board end. The
mouse connects with a RJ-11 (or similar) phone plug to a special socket
in the back of the keyboard.
On type4 keyboards, there are two identical 8-pin mini-DIN sockets under
the keyboard. One takes the cable to the CPU board (can have either type
of connector on the CPU board end), and the other takes the mouse cable.
The CPU board and mouse cables can be plugged in either way around to
facilitate left-hand or right-hand usage.
The pinouts for the two types of keyboard/mouse connector are:
Subject: type 4 / type 3 keyboard pinouts
8 pin socket
7
8 6
5 4 3
2 1
1 GND
2 GND
3 Vcc
4 RxDB (Mouse)
5 TxDA (Keyboard)
6 RxDA (Keyboard)
7 TxDB (Mouse)
8 Vcc
15 pin socket
8 - - - 1
15 - 9
1 RxDA (Keyboard)
3 TxDA (Keyboard)
5 RxDB (Mouse)
7 TxDB (Mouse)
2,4,6,8,9 GND
10-15 Vcc
>Also I need to know what are the lines out on the 9 pin plug for
>the video.
ECL:
Vert
vid+ Horiz |
| | |
1o o o o 5o
6o o o 9o
| | | |
| +---+---+
| |
Vid- gnd
>I also think that there are two and maybe three scsi ports on the machine.
The SCSI port(s) will all be female 50-pin 'D'-type connectors. It's easy
to make a SCSI cable using IDC (crimp-on) connectors by making sure pin 1
of each connector lines up when you crimp them onto the ribbon cable in a
vice.
Regards,
Craig.
--
Craig Dewick - craig@zeta.org.au - http://www.zeta.org.au/~craig
Located in Sydney, Australia.
Sun Ripened Kernels - http://www.zeta.org.au/~craig/srk.html
Surplus and pre-loved Sun Microsystems equipment.
Technical Details
Message-ID:
<4mkcq9$s7r@godzilla.zeta.org.au>Path:
arc1-ca.pugleaf.net!unknown!not-for-mailReferences:
<4m6b9q$t9b@huron.eel.ufl.edu>Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit X-Google-Thread: f4671,2fbcce0eefc291d8,start X-Google-Attributes: gidf4671,public X-Google-Thread: f88e1,e3e4d1df25f70fd4 X-Google-Attributes: gidf88e1,public X-Google-Thread: 10d053,2fbcce0eefc291d8,start X-Google-Attributes: gid10d053,public From: craig@zeta.org.au (Craig Dewick) Subject: Re: 3/260 workstation help needed Date: 1996/05/06 Message-ID: <4mkcq9$s7r@godzilla.zeta.org.au> X-Deja-AN: 153240845 references: <4m6b9q$t9b@huron.eel.ufl.edu> organization: Kralizec Dialup Unix Sydney, +61-2-837-1183 V.32bis newsgroups: alt.sys.sun,aus.computers.sun,comp.sys.sun.hardware