" Fatal server error: no screens found "

Thread View: alt.uu.comp.os.linux.questions

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Heim F. W. Thu, 19 Aug 1999 00:00

#348

Author: Heim F. W.
Date: Thu, 19 Aug 1999 00:00

86 lines
4410 bytes

Hi There,

Now i�m trying and nearly crying because i can�t get my X-Windows
running any more !! >>>:(((

I did put a  " S3 Virge/DX "  graphix-card into my linux machine, it has
the
Chipset: 86C375 !!

Could you please get a look at the following error-message ?
And please tell me what i am doing wrong ??


-- START ---
XFree86 Version 3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: August 4 1997
        If the server is older than 6-12 months, or if your card is
newer
        than the above date, look for a newer version before reporting
        problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.32 i686 [ELF]
Configured drivers:
  S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
      newmmio, mmio_928, s3_generic
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "de"
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) S3: Graphics device ID: "ViRGE/DX or /GX"
(**) S3: Monitor ID: "Generic Monitor"
(--) S3: Mode "640x400" needs vert refresh rate of 69.93 Hz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) S3: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3: Mode "320x200" needs vert refresh rate of 69.93 Hz. Deleted.
(--) S3: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) S3: Invalid vertical timing for mode "400x300". Deleted.
(--) S3: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) S3: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) S3: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) S3: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) S3: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) S3: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Ty
pe1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6

/lib/X11/fonts/100dpi/"
(--) S3: PCI: ViRGE/DX or /GX rev 1, Linear FB @ 0xe0000000
(--) S3: S3 ViRGE chipset: please use "XF86_S3V" server

 *** None of the configured devices were detected.***


Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit:  Connection refused (errno 111):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.
-- END ---


Txs... for your help..
Greating Heim W. F.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads