Article View: amiga.hardware
Article #600Problem with CV64 after installing A3640 card
From: Jostein
Date: Wed, 25 Mar 1998 00:00
Date: Wed, 25 Mar 1998 00:00
38 lines
1414 bytes
1414 bytes
I recently bought a used A3640 CPU board (with an 040/25). I installed it by the book, set the jumper for internal/external CPU Clock and the other one right next to it to external clock too. Everything seems to working just fine. But when I load the Cybervision monitor driver, the system hangs. I've tried booting with no startup-sequence, loading each little command manually. By doing so I managed to load the driver, but it seemed awfully slow. The CV screens seemed to be much slower then AGA screens. I've tried using a P96 driver too, but that too failed. What is wrong? My system: Amiga 4000 Originally 030/25 - now upgraded with the A3640 to 040/25. The A3640 is of version 3.0, but I was told it had been upgraded to version 3.1. 2+12 MB RAM Kickstart 3.0, Workbench 3.1. IDE HD Controller, 850 MB HD. CyberVision 64 4 MB CyberGFX version 3.0 Jostein Huglen jhuglen@online.no
Technical Details
Message-ID:
<35193264.0@d2o201.telia.com>Path:
arc1-ca.pugleaf.net!unknown!not-for-mailShow Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit X-Google-Thread: 103f72,11f6d985b3a2b7c8,start X-Google-Attributes: gid103f72,public From: "Jostein" <jhuglen@online.no> Subject: Problem with CV64 after installing A3640 card Date: 1998/03/25 Message-ID: <35193264.0@d2o201.telia.com> X-Deja-AN: 337685699 X-NNTP-Posting-Host: am-underworld1.akersmic.no X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4 X-Complaints-To: abuse@i.telia.no Newsgroups: amiga.hardware