🚀 go-pugleaf

"Henrik Scheel" <hscheel@post3.tele.dk> wrote:

>I've got a problem with connection between two domains. On both of them I
>got a server. Their names was "wan1" with ip number 172.30.42.2 mask
>255.255.255.0 and "unp1" with ip number 172.30.42.4 mask 255.255.255.0.
>Between them I had a Olicom bridge. Lately I changed the network
>configuration to be "wan1" with ip number 172.30.42.2 mask 255.255.255.0
>and "unp1" with ip number 172.30.43.130 mask 255.255.255.128. And now
This is wrong, do 'sh ip route' on the router and you'll find traffic
going the wrong way, consider this:

172.30.43.128/255.255.255.128 falls within the range:

172.30.43.0/255.255.255.0

Also why subnet if you use private IP? Just pick another number, like
172.31.0.0 or 172.30.44.0/255.255.255.0.

>between them I changed to a Cisco 2500 and 4000 router. Suddenly it's not
>possible to browse fx. unp1 from wan1. And my trust I had between them is
Use WINS to browse across the router (or use 'ip helper-address' on
the router).

>also gone. And It is not possible to use any ressources from the other
>server. But I can make a PING command ok. Can anybody tell my what is
>wrong.
>
>Please help me.
>Henrik
>Hscheel@post3.tele.dk
>


Rodney.van.den.Oever@tip.nl

First of all, when the two were on a bridged network they were able to find
each other with broadcasts ... across routers is a whole 'nother story ...
you can use LMHOSTS entries to let each server know what the IP address of
the other is ... then re-establish your trust. In order to browse  it's
easiest to set up WINS and configure all hosts including the servers to
query WINS ...

SSMoss
===================

Henrik Scheel <hscheel@post3.tele.dk> wrote in article
<01bc4fbb$ec65bb60$6aabefc2@hscheel>...
> Hello there
> 
> I've got a problem with connection between two domains. On both of them I
> got a server. Their names was "wan1" with ip number 172.30.42.2 mask
> 255.255.255.0 and "unp1" with ip number 172.30.42.4 mask 255.255.255.0.
> Between them I had a Olicom bridge. Lately I changed the network
> configuration to be "wan1" with ip number 172.30.42.2 mask 255.255.255.0
> and "unp1" with ip number 172.30.43.130 mask 255.255.255.128. And now
> between them I changed to a Cisco 2500 and 4000 router. Suddenly it's not
> possible to browse fx. unp1 from wan1. And my trust I had between them is
> also gone. And It is not possible to use any ressources from the other
> server. But I can make a PING command ok. Can anybody tell my what is
> wrong.
> 
> Please help me.
> Henrik
> Hscheel@post3.tele.dk
> 
> 

In article <01bc4fbb$ec65bb60$6aabefc2@hscheel>, hscheel@post3.tele.dk says...
>
>Hello there
>
>I've got a problem with connection between two domains. On both of them I
>got a server. Their names was "wan1" with ip number 172.30.42.2 mask
>255.255.255.0 and "unp1" with ip number 172.30.42.4 mask 255.255.255.0.
>Between them I had a Olicom bridge. Lately I changed the network
>configuration to be "wan1" with ip number 172.30.42.2 mask 255.255.255.0
>and "unp1" with ip number 172.30.43.130 mask 255.255.255.128. And now
>between them I changed to a Cisco 2500 and 4000 router. Suddenly it's not
>possible to browse fx. unp1 from wan1. And my trust I had between them is
>also gone. And It is not possible to use any ressources from the other
>server. But I can make a PING command ok. Can anybody tell my what is
>wrong.
>
>Please help me.
>Henrik
>Hscheel@post3.tele.dk
>
>

you new router probably is not passing netbios packets which are necessary
for browsing.. you can add machines on the other net to your lmhosts
table and still browse/mount this way... or see if you can configure
the router...