Thread View: at.novell
2 messages
2 total messages
Started by Joe K. Bales
Fri, 19 Nov 1999 00:00
SAP RIP ROUTER Error
Author: Joe K. Bales
Date: Fri, 19 Nov 1999 00:00
Date: Fri, 19 Nov 1999 00:00
42 lines
2574 bytes
2574 bytes
I am getting the following error on a new server that was setup today. IPX RTR-6.60-2 (SAP sometimes RIP others) ROUTER configuration error detected Node 00D00601FB60 claims network address C14EF0E0 should be 00D05A5D I don't have any idea what 00D00601FB60 mack address is for. But I do know that C14EF0E0 is the NW address of the 802.2 protocol on the new server and the 00D05A5D is the 802.2 protocol address of the old servers. Only the new server is hooked up now and the names of the old and new server are the same VHS1. Now we hooked up the old server and disconnected the NIC cable to the new server to see what if any errors it was getting the following error IPX RTR-6.60-2 (RIP error not both rip and sap) ROUTER configuration error detected Node 080009A4AE9D () claims network address 00005A5E should be 5705D6AC. The 080009A4AE9D is the address of an HP Jet Direct card on the network. 00005A5E is the NW address of the 802.3 protocol on the old server and the 5705D6AC is the 802.3 protocol address of the new server. I sometimes get an error 40 MIO error no the HP Printer that is associated with the address above. I really don't care about the problem on the old server just the SAP and RIP error on the new server. We have reset router at the console and after that show 13 servers when we do a display server command. The every one minute beep is quite annoying. Does anyone have any ideas on what to do with this error message and what if any problem I could get and our the problems with the MIO error on the Jet Direct associated with this? IPX RTR-6.60-2 (SAP sometimes RIP others) ROUTER configuration error detected Node 00D00601FB60 claims network address C14EF0E0 should be 00D05A5D Thanks Joe Bales
Re: SAP RIP ROUTER Error
Author: Ken Agress
Date: Fri, 19 Nov 1999 00:00
Date: Fri, 19 Nov 1999 00:00
40 lines
2432 bytes
2432 bytes
On Fri, 19 Nov 1999 06:07:27 GMT, "Joe K. Bales" <joebales@home.com> wrote: >I am getting the following error on a new server that was setup today. > >IPX RTR-6.60-2 (SAP sometimes RIP others) ROUTER configuration error >detected >Node 00D00601FB60 claims network address C14EF0E0 should be 00D05A5D > >I don't have any idea what 00D00601FB60 mack address is for. But I do know It's the MAC of one of your two servers. >that C14EF0E0 is the NW address of the 802.2 protocol on the new server and >the 00D05A5D is the 802.2 protocol address of the old servers. Only the new Network numbers for servers connecting to the same LAN segment with the same frame type *must* match. Go change the NET= statement on the new server's bind command to match the old network number (00D05A5D). >server is hooked up now and the names of the old and new server are the same >VHS1. You're asking for trouble. Never give servers the same name, even if one's going away. > <snip> > >The 080009A4AE9D is the address of an HP Jet Direct card on the network. >00005A5E is the NW address of the 802.3 protocol on the old server and the >5705D6AC is the 802.3 protocol address of the new server. Your JD card is terribly confused, and needs to be turned off and back on. Once they get their hands on a network number, they won't let go even if it's wrong. Shut it off, fix the other problems, then turn the JD card back on. Ken Agress/CNE Note - While I may reply to direct e-mails, if you really want an answer, please post to the Newsgroups.
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads