porting between 3bs

Thread View: att.sys.3b

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Peter Reed Peter Reed Tue, 08 Nov 1988 21:36

Author: Peter Reed Peter Reed
Date: Tue, 08 Nov 1988 21:36

19 lines
1187 bytes

I am trying to port some software to some of the 3B2 systems.
I have successfully ported the code to a 3B2/400 but am
unable to run it on a 3B2/350(?) (either that or a 3B2/310).

Does anyone know what the differences are in the 3B2/400 and
3B2/350?  Are there certain types of things I should be wary of?

The code uses curses.  It currently shows errant behavior in
reading a <CR> from the terminal.  The routine to read a character
in a curses window is returning the wrong ascii code when a 
<CR> is entered.  I do not necessarilly think this is the *real*
problem.  Most likely it is a memory or pointer problem somewhere.
I only mention this in case this rings a bell with others.  

Any help or differences between the 3B machines would be helpful.

Lisa Hilliard
(internal to att) mvuxn!lah
(external to att) att@lah.mvuxn (I think)

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads