Re: 56K Internal Flex modem cant get recognised!

Article View: aus.computers.linux

Article #47739

Back to aus.computers.linux Previous Next

#47739

From: Denis Hancock
Date: Fri, 01 Jan 1999 00:00

19 lines
1543 bytes

Have you tried setting the BIOS to non-pnp o/s ?

Judd wrote in message <76i3eb$1ih$1@otis.netspace.net.au>...
>I have a PC-Tel 56K Flex internal PNP modem running on Com 4, IRQ 11.
>RedHat Linux 5.2 cant recognise it at all.  I tried using the setserial
>command on both cua3 and ttyS3 to give it the correct values needed, but
>still wont get recognised.  I then tried using isapnptools.rpm to help me,
>but the pnpdump only gives me errors regarding the modem.  My Bios,
however,
>recognises the modem on bootup and assigns it the values required.  My last
>resort was to compile PnP into my kernel using the PNP4Kernel program
>downloadable of the Net.  But still nothing. :(  Any ideas?
>My system is a Pentium II 233 with 32 meg ram, and I have a Vibra 16 pnp
>card that works ok with Linux.
>PS - My modem works perfectly in Windows 98
>Thanx
>
>
>

Technical Details

Message-ID: <3k0j2.19$qZ.61@nsw.nnrp.telstra.net>

Path: arc1-ca.pugleaf.net!unknown!not-for-mail

References: <76i3eb$1ih$1@otis.netspace.net.au>

Show Full Headers

Complete Article Headers

X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 102983,893a70a9960e275a
X-Google-Attributes: gid102983,public
From: "Denis Hancock" <denish@samurai.com.au>
Subject: Re: 56K Internal Flex modem cant get recognised!
Date: 1999/01/01
Message-ID: <3k0j2.19$qZ.61@nsw.nnrp.telstra.net>
X-Deja-AN: 427683488
References: <76i3eb$1ih$1@otis.netspace.net.au>
X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4
X-Complaints-To: abuse@telstra.net
X-Trace: nsw.nnrp.telstra.net 915181951 203.43.4.198 (Fri, 01 Jan 1999 20:12:31 EST)
Organization: Telstra Big Pond Direct
NNTP-Posting-Date: Fri, 01 Jan 1999 20:12:31 EST
Newsgroups: aus.computers.linux

Reply to Parent Message