🚀 go-pugleaf

iv had this problem, with slakware 3.6
i found that the modules did seem to work, however the messages did seem  to slow
down the boot up
i found that removing the module dependencies thing from the /etc/rc.d/rc.modules
ut went away
all teh modules i needed to load either via compiled into teh kernel or loaded as
modules work fine

Terry Porter wrote:

> On Mon, 21 Dec 1998 13:10:28 +0800, Regit Young <regit@wantree.com.au> wrote:
> >Adrain,
> >
> >Not a problem to worry, first varify what are mentioned in those warning, via
> >/var/log or any logging you set in your /etc/syslog.conf
> >
> >If those are needed, make sure that they are compiled either into the kernel or
> >as modules.
> >
> >If not needed, simply "turn them off" via /etc/conf.modules. As an example, this
> >mine conf.modules.
> >
> >".........................
> >alias net-pf-4 off
> >alias net-pf-5 off
> >alias char-major-14 off
> >............................."
> >
> >Have a look at /usr/src/linux/Documentation/devices.txt
> >
> >Cheers
> >Regit
> >
> >a_blount@my-dejanews.com wrote:
> >
> >> Over the weekend I upgraded from RH5.1 to RH5.2, which went without a hitch.
> >> All was working well, went to recompile the 2.0.36 kernel to include support
> >> for  all of the IP masquerading/forwarding stuff and my NIC (3Com 3c509) and
> >> it seemed to work OK but when i booted the new kernel I got a load of errors
> >> at bootup complaining of undefined symbols in the modules.  The modules that
> >> were a problem were all of the ones in /lib/modules/net and
> >> /lib/modules/ipv4.
> >>
> >> A friend said he'd seen this before but that the modules still actually
> >> worked.  Alas this was not the case.  I eventually got the NIC working but
> >> the ipv4 stuff is still giving me errors.
> >>
> >> Just wondering if anyone has had any problems with this kernel and the ipv4
> >> modules before or if anyone can give me any pointers.  If more info is needed
> >> I can post/e-mail the exact modules I was trying to install etc.
> >>
> >> Thanks in advance for any help.
> >>
> >> --
> >> Adrian Blount
> >> Analyst/Programmer
> >> Western Australian Police Service
> >> E-Mail: a_blount(at)wapol.gov.au
> >>
> >> -----------== Posted via Deja News, The Discussion Network ==----------
> >> http://www.dejanews.com/       Search, Read, Discuss, or Start Your Own
> >
> Hi,
>         I think you have a prob with old modules from your old kernel,
> I had this once ages ago, after a kernel re compile. Problem is I can't
> remember what I did to fix it :-(
>
>         Why not just d/l 2.0.26 and make a new kernel? The kernel is NOT disto
> specific.
>
>         I have just upg to 2.0.36 (on a RH4.2) system, and had no troubles with
> making a monolithic and modular kernel.
>
> terry
> --
> **** To reach me, use tjporter@odyssey.apana.org.au ****
>    My Computer is powered by GNU-LINUX, and has been
>  up 1 day 4 hours 22 minutes
> ..........NOTE Spam protection in use...................