🚀 go-pugleaf

On Sat, 22 Nov 1997 10:46:53 +1100, Richard Robertson <rrobbo@ozemail.com.au>
wrote:
>Hello,
>I have recently compiled a kernel (2.0.27) with modules enabled, I did a
>make config; make dep; make clean; make zImage, make modules; make
>modules_install and everything seems to cook on gas (no error messages).
>However, all changes when booting with the new kernel.  I get a large number
>of error messages about symbol versions from insmod during boot.  The
>modules that I wanted (ethercard, serial and msdos fat) do actually load.
>Is there something wrong in my boot scripts?  I have redhat 4.1 with systemV
>layout (as out of the box).  What am I doing wrong and where should I begin
>to look?
>
>Regs
>Richard
>
>
Hi,
   Sounds like you havent removed the OLD modules before doing a
'modules_install'. The old modules are causing the insmod errors. 
  I suggest reading the 'Kernel Howto' for more info.
  Hope this helps.
              Terry 

-- 
****     SLRN Newsreader via Xfree86 on   ---- LINUX ----    2.0.30        ****
*          running TCP/IP over PPP for OFFline  Newsreading                   *
**********************  Note: Spam Killer In Use  *****************************