Re: NCR 53c810 Scsi Controller

Article View: aus.computers.linux

Article #56766

Back to aus.computers.linux Previous Next

#56766

From: David Segall
Date: Mon, 30 Dec 1996 00:00

29 lines
1546 bytes

"David Syratt" <syratt@midcoast.com.au> wrote:

>I am tying to install Linux using a 53c810 PCI Scsi adaptor (which works
>fine in DOS)
>
>When I try to install using Slackware/Redhat etc, I get the following
>message from the boot information screen.
>
>SCSI NCR 53c810 at memory 0xf4000000, io 0x6000, irq 0
>
>scsi0 : IRQ0 not free, detatching.
>
>I currently have a 215M Scsi Maxtor drive at ID 0, and 1 Scsi Panasonic at
>ID 1.
>
>There is a set (5) jumpers on the Adaptor but I have no docs for it.
>
>Any ideas?
>
>Thankyou David ( syratt@midcoast.com.au )
If one of the jumpers is labelled secondary or something similar and
you have an IDE controller on the motherboard try installing the
jumper. This was the the problem with my Gigabyte mother board and
Gigabyte GA410 SCSI controller.  
David Segall                      davidsegall@acm.org
Profectus Pty Ltd                 Telephone: +61 3 9830 5026
25 Myrtle Road                    Fax: +61 3 9830 0959
Canterbury, VIC, 3126 AUSTRALIA

Technical Details

Message-ID: <32c538a8.2577575@nntp.peg.apc.org>

Path: arc1-ca.pugleaf.net!unknown!not-for-mail

References: <01bbeeff$80c3d710$482319cb@homebase>

Show Full Headers

Complete Article Headers

X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 102983,e7046d4a175934ef
X-Google-Attributes: gid102983,public
From: davidsegall@acslink.net.au (David Segall)
Subject: Re: NCR 53c810 Scsi Controller
Date: 1996/12/30
Message-ID: <32c538a8.2577575@nntp.peg.apc.org>
X-Deja-AN: 206786365
sender: davidsegall@peg.apc.org
references: <01bbeeff$80c3d710$482319cb@homebase>
content-type: text/plain; charset=us-ascii
organization: Profectus Pty Ltd
mime-version: 1.0
newsgroups: aus.computers.linux

Reply to Parent Message