🚀 go-pugleaf

Richard,

I believe that if you remove the last "\" in the last line of your
chat's ppp-on-diler script, you s/b OK... I think because of this
character the next blank line is is causing another expectation, in
this case only a ^M.

Can't guarantee this is the cause, but it is a suggestion. 

Happy Holidays.

In <32AEA66C.3ABD@ans.com.au>, Richard Ashton <ashtons@ans.com.au> wrote:
> Hello All,

> I have been having problems with my scripts for PPP,
> this is the output from my logfile...

>   Dec 11 22:27:30 localhost pppd[1095]: pppd 2.2.0 started by root, uid
> 0
>   Dec 11 22:27:31 localhost chat[1096]: expect (^M)
>   Dec 11 22:28:16 localhost chat[1096]: alarm
>   Dec 11 22:28:16 localhost pppd[1095]: Connect script failed
>   Dec 11 22:28:16 localhost pppd[1095]: Exit.
>   Dec 11 22:28:16 localhost chat[1096]: Failed

> I cannot find the 'expect (^M)' in my script, where does this come
> from ? here is my /etc/ppp/scripts/ppp-on script.

>   #!/bin/sh
>   #
>   TELEPHONE=????????
>   LOCAL_IP=0.0.0.0
>   REMOTE_IP=0.0.0.0
>   NETMASK=255.255.255.0
>   export TELEPHONE LOCAL_IP REMOTE_IP NETMASK
>   DIALER_SCRIPT=/etc/ppp/scripts/ppp-on-dialer
>   exec /usr/sbin/pppd -d file /etc/ppp/options  /dev/ttyS1 38400 \
>   connect $DIALER_SCRIPT

> here is my /etc/ppp/scripts/ppp-on-dialer script.

>   !/bin/sh
>   #
>   # This is part 2 of the ppp-on script. It will perform the connection
>   # protocol for the desired connection.
>   #
>   exec chat -v                                            \
>           TIMEOUT         10                              \
>           ABORT           '\nBUSY\r'                      \
>           ABORT           '\nNO ANSWER\r'                 \
>           ABORT           '\nRINGING\r\n\r\nRINGING\r'    \
>           ''              \rAT S0=0 L1 V1 X4 &c1 E1 Q0    \
>           'OK-+++\c-OK'   ATH0                            \
>           TIMEOUT         45                              \
>           OK              ATDT$TELEPHONE                  \
>           CONNECT         ''                              \


> My ISP uses PAP for authentication, so this seems to be o.k but when
> I run my 'ppp-on' script I get the messages as above in my log, also
> my options file for pppd is copied from the PPP-HOWTO as for PAP use.
> could anyone offer me some assistance with this.

> Thanks in Advance,   Richard Ashton.


---------------------------------------------------------------------
Mark J. Jordan Programmer/Analyst    ~~~ Give the gift of life... 
Michigan Community Blood Centers                      GIVE BLOOD! ~~~
mjordan@mail.com
---------------------------------------------------------------------