🚀 go-pugleaf

Guy van Baalen (guyv@snafu.apana.org.au) wrote:
: Greetings all,

: I have a clone Cyclades card, that has worked just fine in pre - 2.0.0
: kernels. Last night I upgraded from 1.3.20 to 2.0.10. The kernel compiled
: fine, no errors.

: The system boots fine with the new kernel, but upon boot I get the message:

: Cyclom driver $Revision: 1.36.3.7 $$Date: 1996/04/19 21:06:18 $
: Cyclom-Y/ISA found at 0xd4000 but the IRQ could not be detected.

: Any help / advice would be most appreciated.

From linux/Documentation/Changes:
Cyclades Serial Driver
======================

   The Cyclades driver has been changed so that the minor numbers start
at 0 instead of 32 (ie: ttyC0 should be major 19, minor 0 in the 2.0.x
kernels while it used to be major 19, minor 32 in the older kernels).
You can use mknod to manually fix this or use a newer version of MAKEDEV.

does that constitute help/advice?
JP