🚀 go-pugleaf

Ronald Gonzalez wrote:
> Hello there.
> I am having problems when enabling a PCMCI ethernet card in a Thinkpad
> Iseries 1400 (type 2621-420) running under OS/2 Warp 4.5.
> The enabler from OS/2 says that the card doesnt exist, but if I run it this
> from a Dos sesion  the card is detected by  the enabler.
> 
> ---config.sys ---
> ....
> ....
> ....
> BASEDEV=PCMCIA.SYS
> DEVICE=C:\THINKPAD\VPCMCIA.SYS
> DEVICE=C:\THINKPAD\PCMSSDIF.SYS
> DEVICE=C:\THINKPAD\PCM2SRAM.SYS
> DEVICE=C:\THINKPAD\FLSH2MTD.SYS
> DEVICE=C:\THINKPAD\PCM2FLSH.SYS
> BASEDEV=PCM2ATA.ADD /S:2 /!DM /NOBEEP
> DEVICE=C:\OS2\BOOT\COM.SYS
> DEVICE=C:\OS2\MDOS\VCOM.SYS
> BASEDEV=OS2PCARD.DMD
> BASEDEV=AUTODRV2.SYS c:\os2\autodrv2.ini
> DEVICE=C:\IBMCOM\MACS\ECARD.OS2 /irq=3 /io=360       <=THIS IS THE
> ENABLER....
> DEVICE=C:\IBMCOM\MACS\PCMND.OS2                            <=THE ETHERNET
> DRIVER
> DEVICE=C:\THINKPAD\$ICPMOS2.SYS /G
> BASEDEV=IBM2SS04.SYS
> ....
> --------------------
> 
> Once I could configure and worked but after restarting didnt anymore!
> Any sugestion ?
> 
> 

I have no experience yet to help you directly but a seach on Google with 
"PCMC OS/2" gave quite a few links.  Here are some of them that may be 
useful:
http://zurich.ai.mit.edu/hypermail/thinkpad/1998-07/0132.html
http://zurich.ai.mit.edu/hypermail/thinkpad/1998-07/0136.html
http://support.ap.dell.com/docs/network/9636c/utility/cardserv.htm