🚀 go-pugleaf

In <3f06na$161$1@perth.DIALix.oz.au>, matt@perth.DIALix.oz.au (Matt Bruce) writes:
>Hi,
>
>I thought it was just my friend who was having troubles printing with
>OS/2 Warp as he has a Star LC10 Colour printer and the software only
>lets him use an equivalent driver.
>
>I had no need to print until today, but I have the same problems. I
>have a Panasonic KX-P1150 (which is in the OS/2 software under the
>Omni driver).
>
>All that happens on my printer is that Draft text gets printed at the
>top of the page and little bits a various places on the page. My
>friend's Star gets nothing but Draft "A"'s all over the page.
>
>If you know what we're doing wrong, PLEASE let me know!!
>
>-- 
>
>-----------------------------------------------------------------
>Matt Bruce    matt@perth.DIALix.oz.au  (Finger for PGP/Geek Code)
>"You're a total smeghead, aren't you Rimmer?"  --  Holly

Okay I had a similar problem, it would goto the Print spooler and
it would stay there, well first I would try using the IBM NULL... driver
it works fine, if that does not work, you need to find out if you  have
a bidirectional parralell port if you don't it will not print.. I had to replace
mine to get Warp and OS/2 2/1.1 to print... you may wanna cheack and see
if your printer cable is using all 25 wires or just 9, that would do that too
first I would try a new cable, if not get a new io card... make sure it is 
bidirectional, that is the most important...

Good luck... Later Ron


P.S. I love Red Dwarf too.. hehehe it very funny, hey do you know
how long till the marathon will be on again?

later
===============================================================================
here is my really kewl Signature..            |   Rhines@ibm.net or
                                                |   Ugeu48a@prodigy.com
                                                |   well Now isn't this Fun..