🚀 go-pugleaf

Mark Krischer <mkrisch@mpce.mq.edu.au> wrote:
>
> Mark Krischer <mkrisch@mpce.mq.edu.au> wrote:
> >
> > thanks to everybody's suggestions.
> > 	osborne technical support said i should exclude memory
> > 	regions a000-cfff, i'll be trying that tonight.  it sounds
> > 	like the best solution i've heard so far. so, for those that
> > 	have a similar problem, you might give this a try.
> > 
> > thanks again
> > 
> > mark
> 
> just a follow-up, excluding the above memory regions didn't help.  it
> appears that 1meg mach64 cards are not supported.  looks like i get
> to spring for an extra meg.  i'll try and get ibm to confirm this, but
> if you've got a 1meg mach64 card and can't run windows, this might be
> the problem.
> 
> mark


Mark

I also have been having problems in getting OS2-Win to run in anything
other than VGA mode.  Like you I have an Osborne Computer (486DX2-66).  
I understand that the ATI mach64 used by Osborne is a customised OEM
version, and that is perhaps why the device drivers for the ATI mach64 
on the OS2 Warp CD-ROM fail to install.  If so, the additional 1 meg
may not help.

If you have been able to overcome the problem since posting your message
I would appreciate your letting me know how.

Regards
H Alexander