🚀 go-pugleaf

Hi all,

I have the following for sale:

I have a GCS Scorpion Sparc 20 Server Clone with a hypersparc 90mhz
(511-6224) processor 64 megs of ram (4 x 16 meg simms), 3 x 2 gig 7200
rpm Fujitsu scsi disks, floppy, cdrom, 4mm wangdat DAT tape, SCSI,
network, built in ISDN, type 5 keyboard, mouse and pad.  It has 4 sbus
slots and 2 mbus slots.

This machine is big, it is a full tower height and 2 atx cases wide.
It has room for one more disk with the cable and a total of 11
internal devices with an appropriate cable.  It has lockable front
doors.

This machine is well configured (for its age) and as far as i know is
fully sparc compatible.  I have included a console post to show what
comes up at boot time.  It does not have a frame buffer but I will
install a GX.  I have not had a chance to fully test it as I am going
interstate for a week.  So it will have to wait, but it did boot fine
via a console.

$900.00

Add $70.00 for a sony gdm-1662b 16" monitor

1 x Sparc IPX with 40mhz cpu, 64 megs of ram, builtin GX
framebuffer, 2 sbus slots (one has an Aurora serial card, no cable)
, 540 meg disk, floppy. Type 4 keyboard, mouse and pad.
The lid is from an IPC  as the original was missing the badge 
so I swapped the lid.
$220.00

2 x Sony GDM-17e10 17" Sun branded monitors with cables.
"Excellent" cosmetic  and working condition.
$250.00 each

1 x Sony GDM-1662b 16" Sun Monitor with cable.
In Excellent cosmetic  and working condition.
Nice and bright.
$100.00

1 x Toshiba XM4101b 4 x cdrom, sparc bootable and fits in a sparc 5
and 20 but does not have the mounting parts.
$100.00
$160.00 in an external 411 case with cable.

1 x Western Digital Enteprise 2170 2.1gig SCSI 3 SCA 80 pin Scsi Disk,
suit Sparc 4,5,20.
$120.00

1 x IBM DPES-31080 1 gig 80 pin SCA SCSI disk to suit Sparc 4/5/20
$65.00

1 x Conner CFP1080e 1 gig 80 pin SCA SCSI disk to suit Sparc 4/5/20
$65.00

2 x Sparc 4/5/20 Disk Sleds to mount disks internally.
$58.00 each

1x Sony cdu-8012  cdrom sun original in a 411 case, sun bootable.
$100.00

1 Sun model Q-A6 sparc laser printer.  Looks like it has toner.  It
powers up with C3 on the digital display and the top light flashing.
I cannot test this so it is as is.  It has a paper tray (it has a
crack in it but it is not bad) However I will refund your money
if it does not work.
$80.00

1 x 811 full height external SCSI cases with 1.6 gig scsi disk, Sun
badged.
$170.00 or $100 without the disk

1 x Archive python dds-1 DAT backup tape drive 3-5 gig.  Internal 5
1/4 faceplate, no mounting rails.
$100.00

1 x Sony SDT-5000 internal 3/12" 4ml DDS-2 4/8 gig DAT tape with a
3/12" faceplate.  Bare unit.
$190.00

1 x Sony SDT-5000 external 3/12" 4ml DDS-2 4/8 gig DAT tape unit in an
ADIC case.  with 1 90m tape.
$390.00

2 x Sparc Lunch stands.   Allows you to neatly & safely stand your
IPC/IPX  on its side.  Matches standard Sun color scheme (light
purple).  An accessory for your workstation to make the small
footprint of your IPC/IPX even smaller!
$45.00 each  or $25 with the IPX mentioned above


1 x  CG3 Frame buffers.
$40.00 each 

1 x Sparc 2 floppy with mounting bracket and cable
$30.00

2 x Sparc Floppies to suit sparcs (they are taken out of  
IPC's but should work with any sparcs) with cable.
$25.00 or $45.00 with lunch box mounting bracket.

10 x Type 5 Keyboards.  You clean them. (no mice)
$30.00 each

3 x Synoptics model 928 10 base T Tranceivers.
$30.00 each

10 x D13w3 male to male monitor cables about 1 metre long
$25.00

10 x Type 4 Keyboard optical mouse and pad sets
$30.00 per set, on special, but you clean them 8-)

I have Solaris 7 Media.  This is the personal edition that I bought
when Sun had their special on.  It is the cardboard sleeve edition,
not the boxed set.  It contains Solaris 7 for Sparc cd, Solaris 7 for
Intel Cd, Soalris 7 Documentation Cd, and a floppy for
booting x86 solaris.  I will also chuck in the Sun original Staroffice
cd.

The "Best" offer gets it.

I am located in Melbourne but can cod.

Email me if you are interested

Thanks

Attila