🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: aus.computers.sun
Article #205

FS: Sparc 20 clone, IPX, 8 meg vsimm, Sparc ram, 17" monitors, cdroms Framebuffers and more

#205
From: Attila Siha
Date: Sat, 01 Jul 2000 00:00
133 lines
4949 bytes
Hi all,

I have the following for sale:

	1 x 8 meg Vsimm for a sparc 20 to add 24 bit video.
	$300.00

	1 x 16 megg simm for a sparc 20 part no. 501-2479 made
	by Samsung
	$45.00

	1 x 16 meg simm for a Sparc 10 part no. 501-2273 also made by
	Samsung
	$40.00

3 x Sony GDM-17e10 17" Sun branded monitors with cables.
"Excellent" cosmetic  and working condition.
$250.00 each

1 x Sony GDM-1662b 16" Sun Monitor with cable.
In Excellent cosmetic  and working condition.
Nice and bright.
$100.00

I have a GCS Scorpion Sparc 20 Server Clone with a hypersparc 90mhz
(511-6224) processor 64 megs of ram (4 x 16 meg simms), 3 x 2 gig 7200
rpm Fujitsu scsi disks, floppy, cdrom, 4mm wangdat DAT tape, SCSI,
network, built in ISDN, type 5 keyboard, mouse and pad.

This machine is big, it is a full tower height and 2 atx cases wide.
It has room for one more disk.  It has lockable front doors.

This machine is well configured (for its age) and as far as i know is
fully sparc compatible.  I have included a console post to show what
comes up at boot time.  It does not have a frame buffer but I will
install a GX.  I have not had a chance to fully test it as I am going
interstate for a week.  So it will have to wait, but it did boot fine
via a console.

$900.00

Add $70.00 for a sony gdm-1662b 16" monitor

1 x Sparc IPX with 40mhz cpu, 64 megs of ram, builtin GX
framebuffer, 2 sbus slots (one has an Aurora serial card, no cable)
, 540 meg disk, floppy. Type 4 keyboard, mouse and pad.
The lid is from an IPC  as the original was missing the badge 
so I swapped the lid.
$220.00

1 x Toshiba XM4101b 4 x cdrom, sparc bootable and fits in a sparc 5
and 20 but does not have the mounting parts.
$100.00
$160.00 in an external 411 case with cable.

1 x Western Digital Enteprise 2170 2.1gig SCSI 3 SCA 80 pin Scsi Disk,
suit Sparc 4,5,20.
$140.00

1x Sony cdu-8012  cdrom sun original in a 411 case, sun bootable.
$100.00

1 Sun model Q-A6 sparc laser printer.  Looks like it has toner.  It
powers up with C3 on the digital display and the top light flashing.
I cannot test this so it is as is.  It has a paper tray (it has a
crack in it but it is not bad) However I will refund your money
if it does not work.
$100.00

1 x 811 full height external SCSI cases with 1.6 gig scsi disk, Sun
badged.
$180.00 each

1 x Archive python dds-1 DAT backup tape drive 3-5 gig.  Internal 5
1/4 faceplate, no mounting rails.
$100.00

2 x Sparc Lunch stands.   Allows you to neatly & safely stand your
IPC/IPX  on its side.  Matches standard Sun color scheme (light
purple).  An accessory for your workstation to make the small
footprint of your IPC/IPX even smaller!
$45.00 each  or $25 with the IPX mentioned above


1 x TGX+ 4 meg 8 bit Frame buffer, up to 1600 x 1280 @ 76 resolution.
$250.00

1 x TGX Frame Buffer
$100.00 each

2 x GX Frame Buffers 
$80.00 each

2 x CG3 Frame buffers.
$40.00 each 

1 x Sparc 2 floppy with mounting bracket and cable
$30.00

2 x Sparc Floppies to suit sparcs (they are taken out of  
IPC's but should work with any sparcs) with cable.
$25.00 or $45.00 with lunch box mounting bracket.

10 x Type 5 Keyboards.  You clean them. (no mice)
$30.00 each


3 x Synoptics model 928 10 base T Tranceivers.
$30.00 each

10 x D13w3 male to male monitor cables about 1 metre long
$25.00

10 x Type 4 Keyboard optical mouse and pad sets
$30.00 per set, on special, but you clean them 8-)

I have Solaris 7 Media.  This is the personal edition that I bought
when Sun had their special on.  It is the cardboard sleeve edition,
not the boxed set.  It contains Solaris 7 for Sparc cd, Solaris 7 for
Intel Cd, Soalris 7 Documentation Cd, and a floppy for
booting x86 solaris.  I will also chuck in the Sun original Staroffice
cd.

The "Best" offer gets it.

I am located in Melbourne but can cod.

Email me if you are interested

Thanks

Attila
Technical Details
Message-ID: <395d8c3e.16816717@harvestbc.com.au>
Path: arc1-ca.pugleaf.net!unknown!not-for-mail

Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 114381,6a27027cf8c409d3,start
X-Google-Attributes: gid114381,public
X-Google-Thread: 108c83,6a27027cf8c409d3,start
X-Google-Attributes: gid108c83,public
X-Google-Thread: 1145ca,6a27027cf8c409d3,start
X-Google-Attributes: gid1145ca,public
X-Google-Thread: 10d053,6a27027cf8c409d3,start
X-Google-Attributes: gid10d053,public
From: arti@hotkey.net.au (Attila Siha)
Subject: FS: Sparc 20 clone, IPX, 8 meg vsimm, Sparc ram, 17" monitors, cdroms Framebuffers and more
Date: 2000/07/01
Message-ID: <395d8c3e.16816717@harvestbc.com.au>
X-Deja-AN: 641119627
Cache-Post-Path: mel.ihug.com.au!unknown@aus-202-68.static.satnet.com.au
Organization: The Internet Group (Melbourne)
X-Server-Date: 1 Jul 2000 06:11:33 GMT
X-Cache: nntpcache 2.3.3b4 (see http://www.nntpcache.org/)
Reply-To: arti@hotkey.net.au
Newsgroups: aus.computers.sun,aus.ads.forsale.computers.used,aus.computers,aus.ads.forsale