🚀 go-pugleaf

On Mon, 3 Jul 2006 01:58:33 +1000
Kralizec Craig <cd@lios.apana.org.au> wrote:

> I've got the cover on the system as I noticed the micro-switch. 8-)
> Still no joy at the moment...

Are the fans running? 

The SB1K/2K take a rather long time to boot. Even the little green light
in the power button only comes on after a minute or so. For a long while
the only indications that something is happening are that the logo
glows and that the fans come one. 

In addition, if you've an XVR-100 as primary display, the DVI output
only works once the X server is running. 

If the system hasn't come to life after about three minutes, check that
the UPA cards (if any) are seated properly. Make sure you press down on
the center of the card and that it snaps into place completely.

Take care,

-- 
Stefaan A Eeckels
-- 
"We have gone from a world of concentrated knowledge and wisdom to one 
of distributed ignorance.  And we know and understand less while being 
increasingly capable."       Prof. Peter Cochrane, formerly of BT Labs
                                 (With thanks to Brian Hamilton Kelly)