🚀 go-pugleaf

In article <307@highett.mel.dbce.csiro.au>, bernard@mel.dbce.csiro.au (Bernard Wilson) writes:
> I have been attempting to establish an e-mail link between our CSIRO
> Division which is connected to AARNet, and CSIRO Headquarters which has
> Keylink accounts.
> 
> Previously, I have been able to send e-mail to Telecom employees using
> 
> username@telecom.telememo.au
> 
> When I try to use what I would have thought would be an equivalent for
> a user in CSIRO who is known to keylink internally as ADMIN/CSIRO
> 
> admin@csiro.telememo.au
> 
> the following error message results
[...]

I copied the following from a Keylink help screen. The spaces were in the
template, and (a) is the Keylink equivalent of `@'. Note that the angle
brackets `<...>' must be included for the Keylink address to function
correctly.

(C:AU, A:TELEMEMO, P:oz.au, "RFC-822":<name(a)location>)

The following e-mail address was used from Keylink to successfully reach me.

(C:AU, A:TELEMEMO, P:oz.au, "RFC-822":<bernard(a)mel.dbce.csiro.au>)

The reply address to reach the Keylink user was:

/G=JENIFER/S=NORTH/O=CSIRO/@telememo.au

I hope that this proves helpful for a few CSIRO Communicators.

-- 
| Bernard Wilson     CSIRO Division of Building, Construction and Engineering |
|                    Post Office Box 56, Highett, Victoria, Australia   3190  |
| Internet: bernard@mel.dbce.csiro.au Tel: +61 3 556 2211 Fax: +61 3 553 2819 |
|_____________________________________________________________________________|