🚀 go-pugleaf

"Brooks N. Texas" wrote:

> I have bought a new system and wanted to network (file share only) with
> my old PC. I bought a NETGEAR home network system and cannot get it and
> get RoadRunner working properly at the same time (seems to be one or the
> other). Computer #2 (old one) shows both computers under Network
> Neighborhood but the new PC (PC1) only shows itself. PC 2 has one NIC
> card and computer #2 has two, one linked to the hub the other to
> RoadRunner. If you KNOW how to straighten this out and get it working I
> would like an hour +/- of your time and will pay you. Please email me and
> tell me how much you want and when you are available, the sooner the
> better!
> Thanks,
>  BT

Lots of variables here, but I've found that most often, the pc that is not
showing is the problem.
Usually, there is a problem with the configuration of the PC that is not
showing.  Start off by swapping out the two network cards, and cables just to
prove that both work.  Then remove all aspects of your network definition,
and allow windows to find everything again.--Goto: Start:Control
Panel:Network
This is just a start point.  From there, double check all aspects of your
network config.

Are you using 98 or 2000?


Tracey