🚀 go-pugleaf

Hi,
Your audio problem could be with digisytem init: it's a settings file that gets
written into the system folder.You should delete it and run the configuration
tool in avid utilities; where it says to recalibrate inputs, do so.It will
replace the digisystem init that you trashed.This file gets corrupted quite
easily.
    If you're not using a black burst generator, then go to the video output
tool and where it says genlock(you might have to click the"more options"dropdown
tab to get at this setting) make sure it says internal.
    Hope this helps.
    Rob Tough
    bumblebee@halifax.andara.com

MarkM wrote:

> Hello I have an Avid MC900 Running Media Composer 6.5 on a Quadra 950.
> Although I am familiar with troubleshooting NLEs in general, not
> specifically the Avid.
>
> Presently we cannot get the Audio to output. Is there perhaps a missing
> extension or something else that may hinder audio functionality? This is an
> older Nubus audio board with a digital in/out and a stereo in/out .
>
> Also, from time to time when playing back a long sequence, we experience red
> digital "garbage" supered over the video on both the output and Avid
> monitor. This is usually followed by a shifting (drifting) of the image
> position to the left (also on both displays) . Is there somewhere in
> software that I have to tell it to use internal/external reference? I am
> presently not using an external reference.
>
> Please cc all replies to markmartinez@bigfoot.com
>
> Thanks,
>
> Mark Martinez
>
> On Site Services
> Rogue River, OR