Article View: bc.general
Article #127Re: Air Care, emissions testing
From: Ken Buckland
Date: Fri, 06 Nov 1992 22:52
Date: Fri, 06 Nov 1992 22:52
21 lines
1307 bytes
1307 bytes
jmorriso@ee.ubc.ca (John Paul Morrison) writes (and draws a fancy picture): > vanderby@mprgate.mpr.ca (David Vanderbyl) writes: > >(This, incidentally, is why a hole in your muffler cannot help > > you pass emissions testing.) > > Depending on the shape of the hole, and its position, the exhaust gases > could easily, and conceivably create a vacuum, and suck in more air into > the hole, thus diluting the exhaust. This does not help you however because their testers pick up the extra air in the exhaust and conclude that you have holes in your exhaust system. This is what happened to me. I was told that they don't care about exhaust system holes though - they just can't get proper readings if such exist. The manager told me that if my holes (half way along the exhaust system) had been big enough, they would have just shoved the probe into one of them and got the necessary readings. Ken Buckland kenb@ee.ubc.ca
Technical Details
Message-ID:
<1992Nov6.225216.23859@ee.ubc.ca>Path:
arc1-ca.pugleaf.net!sparky!uunet!uunet.ca!xenitec!van-bc!cs.ubc.ca!fs1.ee.ubc.ca!kenbShow Full Headers
Complete Article Headers
Newsgroups: bc.general,ubc.general Path: arc1-ca.pugleaf.net!sparky!uunet!uunet.ca!xenitec!van-bc!cs.ubc.ca!fs1.ee.ubc.ca!kenb From: kenb@ee.ubc.ca (Ken Buckland) Subject: Re: Air Care, emissions testing Message-ID: <1992Nov6.225216.23859@ee.ubc.ca> Organization: University of BC, Electrical Engineering Distribution: na Date: Fri, 6 Nov 1992 22:52:16 GMT Lines: 22