Thread View: bit.admin
2 messages
2 total messages
Started by Wayne S. Mery
Mon, 25 Nov 1996 00:00
Gateway allow for closed lists?
Author: Wayne S. Mery
Date: Mon, 25 Nov 1996 00:00
Date: Mon, 25 Nov 1996 00:00
17 lines
1042 bytes
1042 bytes
Does the Gateway at AMU allow for a list to be set to 'postings by subscribers only' and still allow postings to originate from the newsgroup side? I ask because of increasing spammage send to the mailing list, I'd like to 'close' the list. I've been told there is software that allows the gateway to support this change. -- _____________________________________________________________________________ Wayne S. Mery | Systems Programmer, Lehigh University 610-758-3983 wsm0@lehigh.edu | http://www.lehigh.edu/~wsm0 VSE/ESA 1.2 VM/HPO 5 | http://www.lehigh.edu/lists/vse-l/ <---VSE mail list Save a Life..Be a DONOR ftp://rtfm.mit.edu/pub/usenet/bit.listserv.transplant
Re: Gateway allow for closed lists?
Author: Jim McIntosh
Date: Fri, 29 Nov 1996 00:00
Date: Fri, 29 Nov 1996 00:00
34 lines
2174 bytes
2174 bytes
In article <57cpg8$39o1@ns2-1.CC.Lehigh.EDU>, wsm0@Lehigh.EDU (Wayne S. Mery) wrote: > Does the Gateway at AMU allow for a list to be set to > 'postings by subscribers only' > and still allow postings to originate from the newsgroup side? > > I ask because of increasing spammage send to the mailing list, I'd like to > 'close' the list. I've been told there is software that allows > the gateway to support this change. The thing most people do is to change the newsgroup to be moderated, and to specify the list as the address for submissions. This will cause all posts (those from list subscribers as well as usenet readers) to arrive at the same point -- the list address. All the normal tools available to the list owner are then available. You do things such as change the list to "Send=Private" or review certain peoples' posts. Two notes. When someone posts to a moderated newsgroup their news software detects this fact and mails the post *from them* to the address given for submissions (possibly by way of a "mailpath" site). This means posts come from the author and not the gateway. For moderated newsgroup the gateway is really only processing approved posts from the mailing list to the newsgroup. All posts coming from the list are assumed to be approved. Secondly, the process to set a newsgroup takes a while and some posts from people on usenet may be lost if made in the middle of the process. You just need to warn the people who follow your newsgroup of this fact. Their posts will be delivered correctly if they mail them to the list while the newsgroup is being set to moderated. Jim McIntosh (jim@american.edu) The American University Washington, DC USA 20016-8019
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads