coco 3 rgb

Article View: bit.listserv.coco

Article #326

#326

From: motochip
Date: Mon, 04 Apr 2005 02:37

15 lines
1319 bytes

I have a CoCo 3 hooked up to a Commodore 1084 (almost equivalent of a
Magnavox 8CM515).

I built the RGB cable (CoCo 3 IDC 10 pin connector to 6 pin DIN), and it
works good.


I was just wondering how I would go about pulling the sound from the CoCo
3 RGB connector Pin 7....do I also need to pull ground at the same time
from the RGB connector and solder the ground and Pin 7 to an RCA male
connector at the other end so that I may plug it into the sound input of
my 1084 monitor, or do I just need only the sound (Pin 7) to an RCA male
connector?

best regards

Technical Details

Message-ID: <motochip-0304052138570001@s01060005020715c5.sc.shawcable.net>

Path:

arc1-ca.pugleaf.net!g2news1.google.com!news3.google.com!news.glorb.com!news.alt.net!pd7cy2so!shaw.ca!pd7tw1no.POSTED!53ab2750!not-for-mail

Show Full Headers

Complete Article Headers

X-Google-Thread: 110568,cf1b718f96fe3791,start
X-Google-Attributes: gid110568,public
X-Google-Language: ENGLISH,ASCII-7-bit
Path: arc1-ca.pugleaf.net!g2news1.google.com!news3.google.com!news.glorb.com!news.alt.net!pd7cy2so!shaw.ca!pd7tw1no.POSTED!53ab2750!not-for-mail
X-Trace-PostClient-IP: 24.79.143.154
From: motochip@noemail.nonet (motochip)
Newsgroups: bit.listserv.coco
Subject: coco 3 rgb
Message-ID: <motochip-0304052138570001@s01060005020715c5.sc.shawcable.net>
Lines: 15
Date: Mon, 04 Apr 2005 02:37:46 GMT
NNTP-Posting-Host: 24.66.94.143
X-Complaints-To: abuse@shaw.ca
X-Trace: pd7tw1no 1112582266 24.66.94.143 (Sun, 03 Apr 2005 20:37:46 MDT)
NNTP-Posting-Date: Sun, 03 Apr 2005 20:37:46 MDT
Organization: Shaw Residential Internet