(no subject given)

Article View: bit.listserv.coco

Article #43287

#43287

From: Chris Burke
Date: Mon, 20 Dec 1993 17:41

13 lines
1373 bytes

Boisy P. writes:
>To resolve this, open the SC-II.  Hold the SC-II with the MPI connector
>side to your left and the disk drive cable connector to your right.  If
>you look at the 28 pin EPROM, move up about an inch and you'll spot a
>lone jumper block (can't recall the jumper name).  Move the shunt from the
>1 & 2 position to the 2 & 3 position.  This moves the no-halt register
>addresses AWAY from $FF74, and now your Ken-Ton and SC-II can co-exist
>peacefully.

...and don't forget to install the "cc3disk.alt.irq" or "cc3disk.alt.slp"
driver, which knows about the hardware address change.

Chris Burke

Technical Details

Message-ID: <9312201741.AA22129@fh16c.mdd.comm.mot.com>

Path:

arc1-ca.pugleaf.net!gmd.de!xlink.net!zib-berlin.de!netmbx.de!Germany.EU.net!EU.net!howland.reston.ans.net!europa.eng.gtefsd.com!paladin.american.edu!auvm!MDD.COMM.MOT.COM!burke

Show Full Headers

Complete Article Headers

X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 110568,1724489b6681f41d
X-Google-Attributes: gid110568,public
X-Google-ArrivalTime: 1993-12-20 09:52:22 PST
Path: arc1-ca.pugleaf.net!gmd.de!xlink.net!zib-berlin.de!netmbx.de!Germany.EU.net!EU.net!howland.reston.ans.net!europa.eng.gtefsd.com!paladin.american.edu!auvm!MDD.COMM.MOT.COM!burke
Subject: (no subject given)
Comments: Gated by NETNEWS@AUVM.AMERICAN.EDU
Newsgroups: bit.listserv.coco
Return-Path: <@AUVM.AMERICAN.EDU:COCO@PUCC.BITNET>
Message-ID: <9312201741.AA22129@fh16c.mdd.comm.mot.com>
Date: Mon, 20 Dec 1993 09:41:16 PST
Reply-To: Chris Burke <burke@MDD.COMM.MOT.COM>
Sender: COCO - Tandy Color Computer List <COCO@PUCC.BITNET>
From: Chris Burke <burke@MDD.COMM.MOT.COM>
Lines: 12