🚀 go-pugleaf

Hi there -  I have had trouble getting the 'CARD MODULE' to run on
my VM/ESA R1.0 PUT9103+ system. Using the latest source as forwarded
from Cornell (thanks Wendy!), I receive the following results:

Ready; T=0.01/0.01 09:09:50
per i r 2092a.10
Ready; T=0.01/0.01 09:10:02
card load a b a2 (skip
 -> 0002092A  CLI   95F0B531    00021531    CC 1
D T21510.80
R00021510  7AC3C1D9 C4404040 D4C1C9D3 D7C1D340 E6 *:CARD   MAILPAL *
R00021520  C1E2E2C5 D4C2D3C5 40404040 40404040    *ASSEMBLE        *
R00021530  40404040 40404040 40404040 40404040    *                *
R00021540 to 00021560 suppressed line(s) same as above ....
R00021560  00000000 00000000 00000000 00000000    *................*
R00021570 to 0002158F suppressed line(s) same as above ....
B
    0002092E  BM    4740BC92 -> 00021C92    CC 1
B
DMSCAR078E Invalid format for input file.
Ready(00032); T=0.01/0.02 09:10:34
close cons
================================================================================

My email spool file as sent from PUCC has this format:

================================================================================
Received: from orl.mmc.com by IBMH1.ORL.MMC.COM (IBM VM SMTP V2R1) with TCP;
   Fri, 21 Feb 92 15:59:48 EST
Received: from  by orl.mmc.com (4.1/1.34.a)
	id AB26009; Fri, 21 Feb 92 15:59:49 EST
Message-Id: <9202212059.AB26009@orl.mmc.com>
Received: from PUCC.PRINCETON.EDU by pucc.PRINCETON.EDU (IBM VM SMTP V2R2)
   with BSMTP id 9964; Fri, 21 Feb 92 13:59:27 EST
Received: by PUCC (Mailer R2.08 PTF008) id 8545; Fri, 21 Feb 92 13:59:23 EST
Date:         Fri, 21 Feb 1992 13:58:57 -0500
From: Revised List Processor (1.7b) <LISTSERV@pucc.princeton.edu>
Subject:      File: "V2-SRC 2OF8" being sent to you
To: MAINT@ibmh1.orl.mmc.com

:CARD   MAILPAL ASSEMBLE
PALE
TITLE 'MAILPALDColumbia Univ Network MAILER (Rel. 2)E*00001000lAddress-
etc,etc....

================================================================================

It appears that the format of the ":CARD" header card in my email file
is incorrect. (Reference locsym "LOADLP" in "CARD ASSEMBLE".) Does this
indicate a problem at the transmitting end (PUCC) or at my end ?
(I run TCPIP V2R1 for VM.) Any input or suggestions you may have
are appreciated...

Regards,

Rex Tinch
otcm894 at ibmh1.orl.mmc.com

P.S.
Please excuse the cross posting....