🚀 go-pugleaf

On 3/11/13 3:45 PM, Stuart Henderson wrote:
> On 2013/03/11 12:06, Andrew Siegel wrote:
..
>> I've been scratching my head over this one.  Here is my pf.conf:

>> This is under OpenBSD 5.1.  Am I misunderstanding something?  Is some kind of optimization taking place behind the scenes?
>>
>> Andy


Thank you, Stuart and Hrvoje.

On 2013/03/11 12:06, Andrew Siegel wrote:
> I've been scratching my head over this one.  Here is my pf.conf:
> 
> int_if = "em0"
> dmz_if = "em1"
> block log all
> set skip on lo0
> block log quick inet6
> block in  log quick on $int_if from ! <rfc1918> to any
> block out log quick on $int_if from any to ! <rfc1918>
> pass  out log on $int_if inet proto tcp from $int_if:0 to 10.1.1.1 port ldap
> pass  in  log on $dmz_if inet proto tcp from $dmz_if:network to $dmz_if:0 port ldap
> pass  in  log on $dmz_if inet proto icmp from $dmz_if:network  to $dmz_if:0
> pass  out log on $dmz_if inet proto icmp from $dmz_if:0 to $dmz_if:network
> pass  in  log on $int_if inet proto icmp from <rfc1918> to $int_if:0
> pass  out log on $int_if inet proto icmp from $int_if:0 to <rfc1918>
> pass  in  log on $int_if inet proto icmp from <rfc1918> to $dmz_if:network
> pass  out log on $dmz_if inet proto icmp from <rfc1918> to $dmz_if:network
> pass  in  log on $dmz_if inet proto udp from $dmz_if:network to $dmz_if:0 port ntp
> pass  in  log on $int_if inet proto tcp from <rfc1918> to { $int_if:0 $dmz_if:network } port ssh
> pass  out log on $dmz_if inet proto tcp from <rfc1918> to $dmz_if:network port ssh
> pass  out log on $dmz_if inet proto tcp from $int_if:0 to $dmz_if:network port ssh
> pass  out log on $int_if inet proto udp from $int_if:0 to <dns> port domain
> pass  out log on $int_if inet proto udp from $int_if:0 to <ntp> port ntp
> 
> 
> The problem is that some rules end up out of order in the "pfctl -s rules" output (note the icmp rules in particular):
> 
>     0   block drop log all
>     1   block drop in log quick on em0 from ! <rfc1918> to any
>     2   block drop out log quick on em0 from any to ! <rfc1918>
>     3   block drop log quick inet6 all
>     4   pass in log on em0 inet proto icmp from <rfc1918> to 192.168.7.2
>     5   pass in log on em0 inet proto icmp from <rfc1918> to 192.168.8.0/24
>     6   pass in log on em0 inet proto tcp from <rfc1918> to 192.168.7.2 port = 22 flags S/SA
>     7   pass in log on em0 inet proto tcp from <rfc1918> to 192.168.8.0/24 port = 22 flags S/SA
>     8   pass out log on em0 inet proto udp from 192.168.7.2 to <dns> port = 53
>     9   pass out log on em0 inet proto udp from 192.168.7.2 to <ntp> port = 123
>    10   pass out log on em0 inet proto tcp from 192.168.7.2 to 10.1.1.1 port = 389 flags S/SA
>    11   pass out log on em0 inet proto icmp from 192.168.7.2 to <rfc1918>
>    12   pass out log on em1 inet proto icmp from 192.168.8.1 to 192.168.8.0/24
>    13   pass out log on em1 inet proto icmp from <rfc1918> to 192.168.8.0/24
>    14   pass out log on em1 inet proto tcp from <rfc1918> to 192.168.8.0/24 port = 22 flags S/SA
>    15   pass out log on em1 inet proto tcp from 192.168.7.2 to 192.168.8.0/24 port = 22 flags S/SA
>    16   pass in log on em1 inet proto tcp from 192.168.8.0/24 to 192.168.8.1 port = 389 flags S/SA
>    17   pass in log on em1 inet proto icmp from 192.168.8.0/24 to 192.168.8.1
>    18   pass in log on em1 inet proto udp from 192.168.8.0/24 to 192.168.8.1 port = 123
> 
> This is under OpenBSD 5.1.  Am I misunderstanding something?  Is some kind of optimization taking place behind the scenes?
> 
> Andy

Yes. From man pfctl:

     -o level
             Control the ruleset optimizer, overriding any rule file settings.

             -o none       Disable the ruleset optimizer.
             -o basic      Enable basic ruleset optimizations.  This is the
                           default behaviour.
             -o profile    Enable basic ruleset optimizations with profiling.
             For further information on the ruleset optimizer, see pf.conf(5).