Thread View: bit.listserv.physhare
1 messages
1 total messages
Started by Robert Stair
Fri, 29 Jul 1994 05:02
Re: PSSC 5th ed e/m info
Author: Robert Stair
Date: Fri, 29 Jul 1994 05:02
Date: Fri, 29 Jul 1994 05:02
96 lines
4944 bytes
4944 bytes
Since I was a pilot teacher for the 7th edition of PSSC, it was nice to come across a question concerning it on PHYSHARE! Both methods are described in the 7th edition, but if you have the tuning eye tubes, I would heartily recommend them over the CRT setup for two reasons - price (the CRT "Mass of the Electron" apparatus price is outrageous!) and the fact that students can better see what is happening with the tuning eye. As a matter of fact, the main reason that the CRT writeup was included at all was that the authors had determined that the tuning eye tubes (6AF6G) were no longer available. I am not familiar with a 2BP1 tube. Is that the CRT? If it is, the distance from the second set of deflecting plates to the tube face is 6.4 centimeters. On Wed, 27 Jul 1994, Charles W. Robertson wrote: > I'm looking for a copy of the write up for the e/m experiment > described in the 5th edition of the PSSC lab guide. I can't get > one from DC Heath, and was given the impression that in the > 7th edition, the e/m experiment uses the tuning eye tubes and > not the crt's. > Is that right, or is the "crt" method described in the 7th edition? > .. > Can anybody tell me what the drift distance in a 2BP1 tube is? > Is that information included in the write up? > Thanks > C.W. Robertson > WSU Physics Box 32 > Wichita, Ks 67260 > robertso@twsuvm.bitnet > =============================================================================== = > Received: from APPSTATE.BITNET by TWSUVM.UC.TWSU.EDU (Mailer R2.08) with BSMTP > id 0439; Wed, 27 Jul 94 12:14:26 CDT > Received: from lester.appstate.edu by conrad.appstate.edu (PMDF V4.3-7 #6004) > id <01HF7AEVYJ5CBL1CG4@conrad.appstate.edu>; Wed, 27 Jul 1994 13:12:55 EDT > Received: by lester.appstate.edu id <96519>; Wed, 27 Jul 1994 13:12:30 -0400 > Date: Wed, 27 Jul 1994 13:12:20 -0400 > From: The Post Office <postmaster@lester.appstate.edu> > Subject: Delivery problems with your mail > Sender: mailer-daemon@lester.appstate.edu > To: ROBERTSO@TWSUVM.BITNET > Cc: The Post Office <postoffice@lester.appstate.edu> > Message-id: <94Jul27.131230edt.96519@lester.appstate.edu> > X-Envelope-to: ROBERTSO@TWSUVM.BITNET > Content-transfer-encoding: 7BIT > > A copy of your message is being returned to you due to difficulties > encountered while attempting to deliver your mail. > > Very often people attempt to send mail to USERIDs, which are not > known to this particular system. However, campus-wide, that is > within the utu.fi domain, we DO KNOW > Firstname.Familyname@utu.fi > for everybody. Try that form of addresses. > > The following errors occurred during message delivery processing: > > > <local - pira 29999>: user "pira" doesn't exist > > ---------- Original Message ---------- > external > rcvdfrom mm.appstate.edu ([152.10.1.16]) > with ESMTP > authinfo UNKNOWN@mm.appstate.edu (port 56592) > from <ROBERTSO%TWSUVM.BITNET@conrad.appstate.edu> > to <pira@lester.appstate.edu> > Received: from TWSUVM.UC.TWSU.EDU (MAILER@TWSUVM) > by conrad.appstate.edu (PMDF V4.3-7 #6004) > id <01HF78ENXMA8BJS8I6@conrad.appstate.edu>; Wed, 27 Jul 1994 12:15:28 EDT > Received: by TWSUVM (Mailer R2.08) id 0258; Wed, 27 Jul 94 11:15:04 CDT > Date: Wed, 27 Jul 1994 10:54:17 -0500 (CDT) > From: ROBERTSO%TWSUVM.BITNET@conrad.appstate.edu > Subject: Questions about PSSC 5th edition mass of the electron > To: pira@lester.appstate.edu > Message-id: <01HF78EO269EBJS8I6@conrad.appstate.edu> > Content-transfer-encoding: 7BIT > > I'm looking for a copy of the write up for the e/m experiment > described in the 5th edition of the PSSC lab guide. I can't get > one from DC Heath, and was given the impression that in the > 7th edition, the e/m experiment uses the tuning eye tubes and > not the crt's. > Is that right, or is the "crt" method described in the 7th edition? > .. > Can anybody tell me what the drift distance in a 2BP1 tube is? > Is that information included in the write up? > Thanks > C.W. Robertson > WSU Physics Box 32 > Wichita, Ks 67260 > robertso@twsuvm.bitnet >
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads