🚀 go-pugleaf

Thanks, this works most of the time, but I still have a problems every now
and again if I pull the enet cable out.  I wonder if a hardware failure is
different than the client software shutting down, because the server ALWAYS
works if the client is shutdown....If I have a cabling fault, server doens't
always gracefully reset the connection.

Joel

"Jonathan Benedicto" <incorrect@no.server> wrote in message
news:4265cd92$1@newsgroups.borland.com...
> "Joel Guerra" <j.guerra@texasscenic.com> wrote in message
> news:42657f98$1@newsgroups.borland.com...
> > I am using TCustomWinSocket as a 1 client server..the program works
> > if the
> > client exits properly, If the server connection is lost due toe
> > wiring
> > disconnect, the server does
> > some cleanup,but then next the time the client connects, it goes to
> > a second
> > connection instead of my default TCPSock->Socket->Connections[0].
> > If I look
> > at the ActiveConnections, I now see 2 connections......
> >
> > How do I clobber the old connection so that I always have only 1
> > active
> > connection?
>
> Have you tried checking to see if the
> TCPSock->Socket->Connections[0]->Connected is true, and if it is not,
> then calling TCPSock->Socket->Connections[0]->Close().
>
> Just an idea.
>
> Jonathan
>
>
>