🚀 go-pugleaf

> If you disable the "@echo off" command at the very top of the script, then
> you will see the actual commands output to the screen while they are being
> executed.  You can then seen which command is outputting which error.
>

I did the following...

Dissabled the @echo off

Then I got the error : Fatal: File not found: 'Indy50.dpk'

I added the following lines:

    copy System\*.pas ..\C5
    copy System\*.dpk ..\C5
    copy System\*.obj ..\C5
    copy System\*.inc ..\C5
    copy System\*.res ..\C5
    copy System\*.dcr ..\C5

    copy Protocols\*.pas ..\C5
    copy Protocols\*.dpk ..\C5
    copy Protocols\*.obj ..\C5
    copy Protocols\*.inc ..\C5
    copy Protocols\*.res ..\C5
    copy Protocols\*.dcr ..\C5

Then I ran it again and I got errors again doing the IdZlib.pas which I 
ignored the same I did when I used FULLC6.bat; it kept running until I got 
the following error


    C:\Public\indy\C5>C:\PROGRA~1\Borland\CBUILD~3\bin\dcc32.exe 
IndyCore50.dpk /O..
    \Source\objs /DBCB /M /H /W /JPHN -$d-l-n+p+r-s-t-w-y-
    Borland Delphi  Version 13.0  Copyright (c) 1983,99 Inprise Corporation
    IdObjsBase.pas(27)
    IdObjsVCL.pas(30)
    IdStruct.pas(199)
    IndySystem50.dpk(57)
        >>>>>>  IndyCore50.dpk(30) Warning: Package 'IndySystem50' will not 
be written to disk b
        >>>>>>  ecause -J option is enabled
    IndyCore50.dpk(30) Fatal: Required package 'IndySystem50' not found

    C:\Public\indy\C5>if errorlevel 1 goto enderror

    C:\Public\indy\C5>call clean
    'clean' is not recognized as an internal or external command,
    operable program or batch file.

    C:\Public\indy\C5>echo Error!
    Error!

    C:\Public\indy\C5>cd ..\Source
    The system cannot find the path specified.

    C:\Public\indy\C5>PAUSE
    Press any key to continue . . .


It says the IndySystem50 is not written to the disk, but IndiCore50 requires 
it.

I removed the J from the /JPHN part in the following command line

    C:\Public\indy\C5>C:\PROGRA~1\Borland\CBUILD~3\bin\dcc32.exe 
IndyCore50.dpk /O..
    \Source\objs /DBCB /M /H /W /JPHN -$d-l-n+p+r-s-t-w-y-

Then one more error...


    C:\Public\indy\C5>C:\PROGRA~1\Borland\CBUILD~3\bin\dcc32.exe 
IndyCore50.dpk /O..
    \Source\objs /DBCB /M /H /W /PHN -$d-l-n+p+r-s-t-w-y-
    Borland Delphi  Version 13.0  Copyright (c) 1983,99 Inprise Corporation
    IndySystem50.dpk(57)
    IdYarn.pas(47)
    IdTask.pas(119)
    IdContext.pas(201)
    IdCompilerDefines.inc(190)
    IdThreadSafe.pas(719)
    IdThread.pas(580)
    IdCommandHandlers.pas(649)
    IdCmdTCPClient.pas(270)
    IdScheduler.pas(154)
    IdServerIOHandler.pas(105)
    IdServerIOHandlerSocket.pas(153)
    IdServerIOHandlerStack.pas(89)
    IdCustomTCPServer.pas(389) Fatal: Unit name mismatch: 'IdGlobalCore'

    C:\Public\indy\C5>if errorlevel 1 goto enderror


At this point I decided to stop as I did not know what to do...

This is how my modiffied FULLC6.bat that I use to compile the BCB5 packages 
looks like... just in case:


    @echo off

    if (%1)==() goto test_command
    if (%1)==(start) goto start
    goto endok

    :test_command
    ECHO *************  TEST COMMAND   ***********
    PAUSE
    if (%COMSPEC%)==() goto no_command
    %COMSPEC% /E:9216 /C %0 start %1 %2 %3
    goto endok

    :no_command
    ECHO *************  NO COMMAND   ***********
    PAUSE
    echo No Command Interpreter found
    goto endok

    :start
    REM call clean.bat
    ECHO *************  BEFORE CALLING COMPUTIL   ***********
    PAUSE
    computil SetupC5
    if exist setenv.bat call setenv.bat
    if not exist ..\C5\*.* md ..\C5 >nul
    REM if exist ..\C5\*.* call clean.bat ..\C5\
    if (%NDC5%)==() goto enderror

    REM ***************************************************
    REM Compile Runtime Package IndySystem60
    REM ***************************************************
    ECHO *************  BEFORE COPYING THE FILES   ***********
    PAUSE

    cd System
    copy *.pas ..\..\C5
    copy *.dpk ..\..\C5
    copy *.obj ..\..\C5
    copy *.inc ..\..\C5
    copy *.res ..\..\C5
    copy *.dcr ..\..\C5
    copy *.rsp ..\..\C5
    if not exist .\objs\*.* md .\objs >nul
    cd ..\..\C5

    ECHO *************  COMPILING INDYSYSTEM50.DPK   ***********
    PAUSE

    dcc32.exe IndySystem50.dpk /O..\Lib\System\objs /DBCB /M /H /W /JPHN 
/N. -$d-l-n+p+r-s-t-w-y- %2 %3 %4
    if errorlevel 1 goto enderror
    dcc32.exe IndySystem50.dpk /O..\Lib\System\objs /DBCB /M /H /W 
/N. -$d-l-n+p+r-s-t-w-y- %2 %3 %4
    if errorlevel 1 goto enderror
    ECHO *************  CREATING THE LIBRARY   ***********
    PAUSE
    for %%f in (*.obj) do tlib.exe IndySystem50.lib +%%f /P64 > nul

    ECHO *************  CLEANING UP FILES   ***********
    PAUSE

    REM ***************************************************
    REM Clean-up IndySystem60
    REM ***************************************************
    del *.dcu > nul
    del *.pas > nul
    del *.dpk > nul
    del *.obj > nul
    del *.inc > nul
    del *.res > nul
    del *.dcr > nul
    del *.rsp > nul

    REM ***************************************************
    REM Compile Runtime Package IndyCore60
    REM ***************************************************
    cd ..\Lib\Core

    ECHO *************  COPYING CORE FILES   ***********
    PAUSE

    copy *.pas ..\..\C5
    copy *.dpk ..\..\C5
    copy *.obj ..\..\C5
    copy *.inc ..\..\C5
    copy *.res ..\..\C5
    copy *.dcr ..\..\C5
    copy *.rsp ..\..\C5

    if not exist .\objs\*.* md .\objs >nul
    cd ..\..\C5

    ECHO *************  COMPILING INDYCORE50.DPK   ***********
    PAUSE

    dcc32.exe IndyCore50.dpk /O..\Lib\Core\objs /DBCB /M /H /W /JPHN /N. 
/U. -$d-l-n+p+r-s-t-w-y- %2 %3 %4
    if errorlevel 1 goto enderror
    dcc32.exe IndyCore50.dpk /O..\Lib\Core\objs /DBCB /M /H /W /N. 
/U. -$d-l-n+p+r-s-t-w-y- %2 %3 %4
    if errorlevel 1 goto enderror

    ECHO *************  CREATING CORE LIBRARY   ***********
    PAUSE

    for %%f in (*.obj) do tlib.exe IndyCore50.lib +%%f /P64 > nul
    del *.obj > nul

    REM ***************************************************
    REM Compile Designtime Package dclIndyCore60
    REM ***************************************************

    ECHO *************  COMPILING DCLINDYCORE50.DPK   ***********
    PAUSE

    dcc32.exe dclIndyCore50.dpk /O..\Lib\Core\objs /DBCB /M /H /W /Z /JPHN 
/N. /U. -$d-l-n+p+r-s-t-w-y- %2 %3 %4
    if errorlevel 1 goto enderror
    dcc32.exe dclIndyCore50.dpk /O..\Lib\Core\objs /DBCB /M /H /W /Z /N. 
/U. -$d-l-n+p+r-s-t-w-y- %2 %3 %4
    if errorlevel 1 goto enderror

    ECHO *************  CREATING DCLCORE LIBRARY   ***********
    PAUSE
    for %%f in (*.obj) do tlib.exe dclIndyCore50.lib +%%f /P64 > nul

    ECHO *************  CLEANING UP CORE FILES   ***********
    PAUSE

    REM ***************************************************
    REM Clean-up IndyCore60
    REM ***************************************************
    del *.dcu > nul
    del *.pas > nul
    del *.dpk > nul
    del *.obj > nul
    del *.inc > nul
    del *.res > nul
    del *.dcr > nul
    del *.rsp > nul

    REM ***************************************************
    REM Compile Runtime Package IndyProtocols60
    REM ***************************************************

    ECHO *************  COPYING PROTOCOL FILES  ***********
    PAUSE

    cd ..\Lib\Protocols
    copy *.pas ..\..\C5
    copy *.dpk ..\..\C5
    copy *.obj ..\..\C5
    copy *.inc ..\..\C5
    copy *.res ..\..\C5
    copy *.dcr ..\..\C5
    copy *.rsp ..\..\C5
    if not exist .\objs\*.* md .\objs >nul
    cd ..\..\C5

    ECHO *************  COMPILING PROTOCOLS ***********
    PAUSE
    ECHO *************  FIRST ***********
    PAUSE
    dcc32.exe IndyProtocols50.dpk /O..\Lib\Protocols\objs /DBCB /M /H /W 
/JPHN /N. /U. -$d-l-n+p+r-s-t-w-y- %2 %3 %4
    if errorlevel 1 goto enderror
    ECHO *************  SECOND ***********
    PAUSE
    dcc32.exe IndyProtocols50.dpk /O..\Lib\Protocols\objs /DBCB /M /H /W /N. 
/U. -$d-l-n+p+r-s-t-w-y- %2 %3 %4
    if errorlevel 1 goto enderror

    ECHO *************  DELETING THIRD PARTY FILES   ***********
    PAUSE

    REM ***************************************************
    REM Delete third-party .obj files
    REM before compiling the .lib file
    REM ***************************************************
    del adler32.obj > nul
    del compress.obj > nul
    del crc32.obj > nul
    del deflate.obj > nul
    del example.obj > nul
    del gzio.obj > nul
    del infback.obj > nul
    del inffast.obj > nul
    del inflate.obj > nul
    del inftrees.obj > nul
    del minigzip.obj > nul
    del trees.obj > nul
    del uncompr.obj > nul
    del zutil.obj > nul
    ECHO *************  CREATING PROTOCOLS LIBRARY ***********
    PAUSE

    for %%f in (*.obj) do tlib.exe IndyProtocols50.lib +%%f /P64 > nul
    del *.obj > nul

    REM ***************************************************
    REM Compile Designtime Package dclIndyProtocols60
    REM ***************************************************

    ECHO *************  COMPILING dclPROTOCOLS   ***********
    PAUSE
    dcc32.exe dclIndyProtocols50.dpk /O..\Lib\Protocols\objs /DBCB /M /H /W 
/JPHN /N. /U. -$d-l-n+p+r-s-t-w-y- %2 %3 %4
    if errorlevel 1 goto enderror
    dcc32.exe dclIndyProtocols50.dpk /O..\Lib\Protocols\objs /DBCB /M /H /W 
/N. /U. -$d-l-n+p+r-s-t-w-y- %2 %3 %4
    if errorlevel 1 goto enderror
    for %%f in (*.obj) do tlib.exe dclIndyProtocols50.lib +%%f /P64 > nul

    ECHO *************  DELETING PROTOCOLS FILES  ***********
    PAUSE

    REM ***************************************************
    REM Clean-up IndyProtocols60
    REM ***************************************************
    del *.dcu > nul
    del *.pas > nul
    del *.dpk > nul
    del *.obj > nul
    del *.inc > nul
    del *.res > nul
    del *.dcr > nul
    del *.rsp > nul
    cd ..\Lib
    goto endok

    :enderror
    REM call ..\Lib\clean.bat
    cd ..\Lib
    echo Error!

    :endok
    pause


Thanks again

JLoz