🚀 go-pugleaf

On Tue, 24 Jan 2006 08:52:35 -0200, "Rodrigo" <rt@ptn.com.br> wrote:

>Hi everyone!
>
>I have a BCB6 project that uses Indy8. It was doin' fine until I decided to 
>upgrade to Indy9. I almost got crazy because of the winsock2.h and 
>windsock.h conflict. I used the #ifndef _WINSOCKAPI_
>#define _WINSOCKAPI_
>#endif
>
> code and now it compiles. But at the and of the compile job I got the 
>following errors:
>
>[Linker Error] Unresolved external 'Idhttp::TIdHTTP::' referenced from 
>D:\CLIENTES\CPA\MDSD\CANAL CPA\CANALCPA.OBJ
>[Linker Error] Unresolved external '__fastcall 
>Idhttp::TIdCustomHTTP::~TIdCustomHTTP()' referenced from 
>D:\CLIENTES\CPA\MDSD\CANAL CPA\CANALCPA.OBJ

<snip>

Include Indy9 library files in your project, you seem to have them
outside of your include path

Best regards,

zara

"Rodrigo" <rt@ptn.com.br> wrote in message
news:43d60632@newsgroups.borland.com...

>  But at the and of the compile job I got the following errors:

Those errors suggest that you are not linking Indy's packages into your
project.

Also, did you remove Indy 8 from your machine before installing Indy 9?
BCB6 ships with Indy 8 preinstalled.  You must remove it before Indy 9 will
work.  The removal instructions are in Indy's Knowledge Base
(http://www.indyproject.org/KB).


Gambit

First of all, thank you very much for your reply.

I did remove Indy8 from my BCB6. I don't know if it means from my machine 
;-)

I created simple projects using Indy9 and they worked. But my old and real 
projects are compiling but not linking due to those erros I sent before. I 
tried comparing the "simple projects" and the "real projects" and I could 
not find anything diferent or unusual.

So, help me out, please ;-)

Thanks again.

-- 
Rodrigo Ten�rio
Press Time Networking
rt@ptn.com.br
+55 (44) 3225-1824

"Remy Lebeau (TeamB)" <no.spam@no.spam.com> escreveu na mensagem 
news:43d65d7b$1@newsgroups.borland.com...
>
> "Rodrigo" <rt@ptn.com.br> wrote in message
> news:43d60632@newsgroups.borland.com...
>
>>  But at the and of the compile job I got the following errors:
>
> Those errors suggest that you are not linking Indy's packages into your
> project.
>
> Also, did you remove Indy 8 from your machine before installing Indy 9?
> BCB6 ships with Indy 8 preinstalled.  You must remove it before Indy 9 
> will
> work.  The removal instructions are in Indy's Knowledge Base
> (http://www.indyproject.org/KB).
>
>
> Gambit
>
> 

"Rodrigo" <rt@ptn.com.br> wrote in message
news:43d6674b@newsgroups.borland.com...

> I did remove Indy8 from my BCB6. I don't know if it means
> from my machine  ;-)

Removing the packages from the IDE does not remove the files from the
machine.  You have to delete the files from the machine completely.  The
Knowledge Base tells you which files to look for.

> I created simple projects using Indy9 and they worked. But my old
> and real projects are compiling but not linking due to those erros I
> sent before.

You are probably still linking to the old Indy 8 files.


Gambit

Ok, I did it all. I removed all Indy8 files and reinstalled Indy9 but the 
linking problem persists. And my hair is falling more quickly now ;-)

Any ideas?

---
Rodrigo

"Remy Lebeau (TeamB)" <no.spam@no.spam.com> escreveu na mensagem 
news:43d68dd1$1@newsgroups.borland.com...
>
> "Rodrigo" <rt@ptn.com.br> wrote in message
> news:43d6674b@newsgroups.borland.com...
>
>> I did remove Indy8 from my BCB6. I don't know if it means
>> from my machine  ;-)
>
> Removing the packages from the IDE does not remove the files from the
> machine.  You have to delete the files from the machine completely.  The
> Knowledge Base tells you which files to look for.
>
>> I created simple projects using Indy9 and they worked. But my old
>> and real projects are compiling but not linking due to those erros I
>> sent before.
>
> You are probably still linking to the old Indy 8 files.
>
>
> Gambit
>
>