🚀 go-pugleaf

"Vladimir Stefanovic" <antivari@po.sbb.co.yu> wrote in message
news:434691e0@newsgroups.borland.com...

> I have problems while installing Indy 10.0.52 on BCB6.

The Indy developers do not currently have any install files for Indy 10
under BCB.  There are some third-party packages floating around, though.

Also, the latest snapshot version of Indy 10 is 10.1.3.

> Copied those folders (and their contents, of course) except
> "IndySuperCore" in the BCB6\Lib Install folder (for example):
>
>        C:\Program Files\Borland\CBuilder6\Lib\

That is not a good place to put the files.  If you must place them under the
Borland folder hierarchy, then you should use the \Source folder instead of
the \Lib folder, for example:

    C:\Program Files\Borland\CBuilder6\Source\Indy

> 8)  Selected all files with *.pas extension
>
> 9)  Gave a name for 'Package file name' section, like:
>     IndySystem10052.bpk
>
> 10) Gave a name for 'Package description' section, like:
>     IndySystem10.0.52

Indy 10 is designed to be used as multiple packages.  Each of the folders
(Core, Protocols, System, SuperCore) should be in their own individual
packages.

> I GOT ERROR AT LINE (IdAssemblyInfo.pas):

You included Indy's .NET source files into your package.  BCB does not
support .NET.


Gambit

i have placed the packages on the attachments group, i have used them some 
time ago and they worked ok...., went back to Indy 9.x


"Vladimir Stefanovic" <antivari@po.sbb.co.yu> wrote in message 
news:434691e0@newsgroups.borland.com...
> Hi,
>
> I have problems while installing Indy 10.0.52
> on BCB6. I tried to find answer in these groups
> but unfortunately I haven't succeded to complete
> the installation.
>
> This is the procedure I tried:
>
>
> 1)  Unpacked Indy 10.0.52 source files
>    (indy10.0.52_source.zip) somewhere on
>    my hard drive and kept them as archive.
>
> 2)  The unpacked source files were in this
>    folder hierarchy:
>
>       IndySystem
>       IndyCore
>       IndyProtocols
>       IndySuperCore
>
> 3)  Copied those folders (and their contents, of
>    course) except "IndySuperCore" in the BCB6\Lib
>    Install folder (for example):
>
>       C:\Program Files\Borland\CBuilder6\Lib\
>
> 4)  Opened BCB6
>
> 5)  Opened: Main Menu / Components / Install Component
>
> 6)  In the "Install Component" dialog switched to the
>    tab "Into new package"
>
> 7)  Pressed Browse in 'Unit file name' section
>
> 8)  Selected all files with *.pas extension
>
> 9)  Gave a name for 'Package file name' section, like:
>    IndySystem10052.bpk
>
> 10) Gave a name for 'Package description' section, like:
>    IndySystem10.0.52
>
> 11) Pressed OK
>
> 12) IDE opened all selected files and have shown the
>    confirmation dialog:
>
>    "Package IndySystem10052.bpl will be built then
>    installed. Continue?"
>
> 13) Pressed "Yes"
>
>
> I GOT ERROR AT LINE (IdAssemblyInfo.pas):
>
>    uses
>  System.Reflection, System.Runtime.CompilerServices;
>
>
> What I did wrong (maybe because the 13th item ;)?
>
>
>
> -- 
> Best regards,
> Vladimir Stefanovic
> 

> i have placed the packages on the attachments group,
> i have used them some time ago and they worked ok....,

Are the files you placed in attachments group all what I
need to install Indy 10 on BCB6?

Can you please provide some more details how to
install the files?

> [...] went back to Indy 9.x

Have you experienced some problems with
BCB6 & Indy 10, or it's something else?




-- 
Best regards,
Vladimir Stefanovic 

> The Indy developers do not currently have any install files
> for Indy 10 under BCB.

Do you refer to the source files that are assorted
only for BCB6 installation, or you refer on automated
install procedures for BCB?

In fact I have't seen any automated procedure for BCB
at all. All the automated installations I saw were made
for .NET, C#, Delphi...

> There are some third-party packages floating around,
> though.

I couldn't find even that (google-ing).

> Also, the latest snapshot version of Indy 10 is 10.1.3.

The latest Indy 10 source available at Indy site was
10.0.052 :(

> That is not a good place to put the files. If you must place
> them under the Borland folder hierarchy, then you should
> use the \Source folder instead of the \Lib folder, for example:
>  C:\Program Files\Borland\CBuilder6\Source\Indy

No, it's not a must. I just haven't an idea where to place
them. Is placing somewhere at second (D) partition better?

>> I GOT ERROR AT LINE (IdAssemblyInfo.pas):
>
> You included Indy's .NET source files into your package.
> BCB does not support .NET.

Do you have an idea what is the easiest way to know if the file
is for .NET, so that I can skip it?




-- 
Best regards,
Vladimir Stefanovic 

>> Also, the latest snapshot version of Indy 10 is 10.1.3.
>
> The latest Indy 10 source available at Indy site was
> 10.0.052 :(

Yes, but you must download it from a mirror server:
http://www.indyproject.org/Sockets/Download/Files/Indy10.iwp >> click at 
"Development Snapshot" >> click again at "Development Snapshot" >> choose a 
mirror server below (e.g. "Neillans.co.uk (United Kingdom) Mirror") and 
click at the FTP link. 

> Yes, but you must download it from a mirror server:
> http://www.indyproject.org/Sockets/Download/Files/Indy10.iwp
> >> click at
> "Development Snapshot" >> click again at "Development
> Snapshot" >> choose a  mirror server below
> (e.g. "Neillans.co.uk (United Kingdom) Mirror") and click at the FTP link.

Thank you, I have found the code...



-- 
Best regards,
Vladimir Stefanovic 

"Vladimir Stefanovic" <antivari@po.sbb.co.yu> wrote in message
news:4347f923@newsgroups.borland.com...

> Do you refer to the source files that are assorted
> only for BCB6 installation, or you refer on
> automated install procedures for BCB?

Both.  Indy 10 has an installer that does not target BCB at this time.  And
also, portions of Indy 10's source code is not ready for BCB yet.

> In fact I have't seen any automated procedure for BCB
> at all. All the automated installations I saw were made
> for .NET, C#, Delphi...

Exactly.

> The latest Indy 10 source available at Indy site was 10.0.052 :(

That is the release version of the code.  The snapshot version of the code
is 10.1.3, and is also available on the website.


Gambit