🚀 go-pugleaf

"Jo�o Pereira" <joao@pupula.com> wrote in message
news:4110d343$1@newsgroups.borland.com...

> I've tryed this code:
<snip>

That code is nowhere near what web browsers require.

> but in IE the image just loads about 90% and i gotta press
> stop to see the image. Seems like i got to send the stream size,
> but how can i do that?

I strongly suggest you read the HTTP RFCs.  They tell you what all is
actually required:

    Hypertext Transfer Protocol version 1.0 (HTTP/1.0)
    http://www.ietf.org/rfc/rfc1945.txt

    Hypertext Transfer Protocol version 1.1 (HTTP/1.1)
    http://www.ietf.org/rfc/rfc2616.txt

I should warn you, though - HTTP is not trivial to implement properly.  I
suggest you get a pre-made HTTP server component, such as the one from Indy
(http://www.indyproject.org) or ICS (http://www.overbyte.be), and let it do
all the bulk of the work for you.


Gambit

You probably need to disconnect the connection, from the server end, 
after you send all the data to the client....
e.g. Socket->Disconnect();


Jo�o Pereira wrote:
> How can i automatic send a image to a web page. Per example inserting my
> remote IP in the address bar of IE and automaticly loads a image that is on
> the other side.
> 
> I've tryed this code:
> 
> void __fastcall TForm1::MyServerClientRead(TObject *Sender,
>       TCustomWinSocket *Socket)
> {
>         TMemoryStream *MyStream = new TMemoryStream();
>         MyStream->LoadFromFile("c:\\imagem.jpg");
>         Socket->SendStream(MyStream);
> 
> }
> 
> but in IE the image just loads about 90% and i gotta press stop to see the
> image. Seems like i got to send the stream size, but how can i do that?
> 
> 
>