Thread View: borland.public.cppbuilder.internet.socket
7 messages
7 total messages
Started by Joe Pasquariello
Thu, 06 Dec 2007 01:58
Build and Install Indy10 in BCB 2006?
Author: Joe Pasquariello
Date: Thu, 06 Dec 2007 01:58
Date: Thu, 06 Dec 2007 01:58
12 lines
1319 bytes
1319 bytes
Hello All, I've followed the links from the Indy site, downloaded the latest Indy10 snapshot ZIP file, and extracted all of the files. Can anyone point me to instructions for what to do next? I've read through all of the posts in this group, and while I have found some questions on this topic, I haven't found anything close to a step-by-step guide. Is there some reason this can't happen? Thanks in advance. Joe
Re: Build and Install Indy10 in BCB 2006?
Author: Remy Lebeau (TeamB)
Date: Thu, 06 Dec 2007 02:35
Date: Thu, 06 Dec 2007 02:35
21 lines
1608 bytes
1608 bytes
"Joe Pasquariello" <joep@fenway.com> wrote in message news:475756f3$1@newsgroups.borland.com... > Can anyone point me to instructions for what to do next? There aren't any. > I've read through all of the posts in this group, and while I > have found some questions on this topic, I haven't found > anything close to a step-by-step guide. There are no .BAT scripts available for BDS 2006, so installation steps depend on whether you have the Delphi personality installed in the IDE or not. If you do, then you can compile and install the Indy*100.dpk and dclIndy*100.dpk packages directly in the IDE. Otherwise, you will have to use the command-line dcc32.exe compiler instead, and then install the compiled package binaries afterwards. Gambit
Re: Build and Install Indy10 in BCB 2006?
Author: Joe Pasquariello
Date: Thu, 06 Dec 2007 16:47
Date: Thu, 06 Dec 2007 16:47
36 lines
2324 bytes
2324 bytes
Hi Remy, I do not have the Delphi personality installed. I found a "third-party" Fullc10.bat file in one of the posts, but no instructions on running it, i.e. no description of the arguments. Are there instructions somewhere on running these batch files that describe the arguments? If I can get through this, I will create a document that describes how to do it. Thanks very much. I know you put tons of work into this. Joe "Remy Lebeau (TeamB)" <no.spam@no.spam.com> wrote in message news:475760bf$1@newsgroups.borland.com... > > "Joe Pasquariello" <joep@fenway.com> wrote in message > news:475756f3$1@newsgroups.borland.com... > > > Can anyone point me to instructions for what to do next? > > There aren't any. > > > I've read through all of the posts in this group, and while I > > have found some questions on this topic, I haven't found > > anything close to a step-by-step guide. > > There are no .BAT scripts available for BDS 2006, so installation steps > depend on whether you have the Delphi personality installed in the IDE or > not. If you do, then you can compile and install the Indy*100.dpk and > dclIndy*100.dpk packages directly in the IDE. Otherwise, you will have to > use the command-line dcc32.exe compiler instead, and then install the > compiled package binaries afterwards. > > > Gambit > >
Re: Build and Install Indy10 in BCB 2006?
Author: Remy Lebeau (TeamB)
Date: Thu, 06 Dec 2007 17:25
Date: Thu, 06 Dec 2007 17:25
17 lines
1631 bytes
1631 bytes
"Joe Pasquariello" <joep@fenway.com> wrote in message news:4758276a$1@newsgroups.borland.com... > I do not have the Delphi personality installed. Then you have to use the command-line dcc32.exe compiler instead. > I found a "third-party" Fullc10.bat file in one of the posts, but no > instructions on running it, i.e. no description of the arguments. > Are there instructions somewhere on running these batch files > that describe the arguments? There are no arguments for the .BAT scripts. Just run them as-is. Gambit
Re: Build and Install Indy10 in BCB 2006?
Author: Joe Pasquariello
Date: Sun, 09 Dec 2007 00:39
Date: Sun, 09 Dec 2007 00:39
30 lines
2099 bytes
2099 bytes
For a variety of reasons, I bit the bullet and moved up to RAD2007, so now I have the Delphi personality and I have also moved up to Indy10. Do you have a reference to instructions for updating Indy10 to the latest version? I know you are working on a new version, but I gather there have also been lots of changes since the version that comes with RAD2007? Joe "Remy Lebeau (TeamB)" <no.spam@no.spam.com> wrote in message news:475830c6$1@newsgroups.borland.com... > > "Joe Pasquariello" <joep@fenway.com> wrote in message > news:4758276a$1@newsgroups.borland.com... > > > I do not have the Delphi personality installed. > > Then you have to use the command-line dcc32.exe compiler instead. > > > I found a "third-party" Fullc10.bat file in one of the posts, but no > > instructions on running it, i.e. no description of the arguments. > > Are there instructions somewhere on running these batch files > > that describe the arguments? > > There are no arguments for the .BAT scripts. Just run them as-is. > > > Gambit > >
Re: Build and Install Indy10 in BCB 2006?
Author: Remy Lebeau (TeamB)
Date: Mon, 10 Dec 2007 17:40
Date: Mon, 10 Dec 2007 17:40
20 lines
1682 bytes
1682 bytes
"Joe Pasquariello" <joep@fenway.com> wrote in message news:475b38fa$1@newsgroups.borland.com... > Do you have a reference to instructions for updating Indy10 > to the latest version? No. All I can say is to uninstall the old packages from the IDE, then physically remove the files from the machine, then you can compile and install the new packages. > I know you are working on a new version, but I gather there > have also been lots of changes since the version that comes > with RAD2007? Yes, there have been. The current snapshot is what is available for the public to use right now. Gambit
Re: Build and Install Indy10 in BCB 2006?
Author: Joe Pasquariello
Date: Tue, 11 Dec 2007 22:08
Date: Tue, 11 Dec 2007 22:08
28 lines
1955 bytes
1955 bytes
Okay. Thanks. Are there any C++ example programs anywhere? Joe "Remy Lebeau (TeamB)" <no.spam@no.spam.com> wrote in message news:475d7a4c$1@newsgroups.borland.com... > > "Joe Pasquariello" <joep@fenway.com> wrote in message > news:475b38fa$1@newsgroups.borland.com... > > > Do you have a reference to instructions for updating Indy10 > > to the latest version? > > No. All I can say is to uninstall the old packages from the IDE, then > physically remove the files from the machine, then you can compile and > install the new packages. > > > I know you are working on a new version, but I gather there > > have also been lots of changes since the version that comes > > with RAD2007? > > Yes, there have been. The current snapshot is what is available for the > public to use right now. > > > Gambit > >
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads