🚀 go-pugleaf

On Mon, 30 Aug 2004 13:49:15 +1000, "Peter P" <pp1@comrad.com.au>
wrote:

>I would appreciate any assistance with explanation of where the time and
>date stamp of Digital Video (DV) AVI files is placed (in either Type 1 or
>Type 2 DV files). I have checked on MSDN for explanation but cannot find (or
>determine) where the stamp(s) are kept in the file.
>
What I'm going to tell you is in part the result of intensive search
in the net -with no much success, as you've probably seen by yourself-
and own experimentation. This means that in no way will I give general
advice, but simply tell what I've found.

All what follows refers to Type-1 DV AVI files. As you know this is
the format -headers apart- in which the stream is natively stored on
DV tape.

The DV stream is organized into 80-byte so-called DIF blocks; 150 of
them form a DIF sequence; an NTSC frame comprises 10 sequences (120000
bytes), a PAL one 12 (144000 bytes).
Each DIF sequence has 135 proper video blocks (image data), 9
interleaved audio blocks, the remaining 6 being:
	1 header block
	2 subcode blocks, where timecode resides
	3 VAUX blocks, where date/time is recorded, besides other data

To reach the subcode and VAUX blocks I first look for 'data chunks'
(terminology from MS "AVI RIFF File Reference"). In DV these are
identified by a '##dc' FOURCC; in my D8 streams it's normally '00dc'.
(Any decent hex editor will do the task)

Eight bytes past the beginning of the FOURCC, the header block starts,
identified by '1Fh'. 80 bytes beyond, the first subcode block begins
with '3Fh'. Here you can find the recording timecode in the '13h'
field with the format 'frame-second-minute-hour' (you have to subtract
40h, 80h, 80h and C0h respectively to get them in decimal values -BCD
really)

The VAUX blocks start with a '5Xh' identifier. I've seen written
somewhere that it should be '5Fh', but my SONY produces other
identifiers -always starting with 5. Here you'll go for the '62h' and
'63h' fields, to find

	62h: 'FF'-day-month-year (subtract C0h, E0h for day, month)

	63h: 'FF'-second-minute-hour (treat as in timecode)

Other fields in the VAUX give recording data -aperture, etc- I guess
but have no yet experimented with them.

Hope this helps. I'd recommend you to give a look at the 'libdv' free
code. It's easily found through Google and can give interesting info
to the curious.

Julio

BIG Thanks Julio. I'll post the results,
Peter

"Julio Farias" <jfariasXXXX@uolsinectis.com.ar> wrote in message
news:i37kj0p6hhugruv89p0kktsk85d9ippn7u@4ax.com...
> On Mon, 30 Aug 2004 13:49:15 +1000, "Peter P" <pp1@comrad.com.au>
> wrote:
>
> >I would appreciate any assistance with explanation of where the time and
> >date stamp of Digital Video (DV) AVI files is placed (in either Type 1 or
> >Type 2 DV files). I have checked on MSDN for explanation but cannot find
(or
> >determine) where the stamp(s) are kept in the file.
> >
> What I'm going to tell you is in part the result of intensive search
> in the net -with no much success, as you've probably seen by yourself-
> and own experimentation. This means that in no way will I give general
> advice, but simply tell what I've found.
>
> All what follows refers to Type-1 DV AVI files. As you know this is
> the format -headers apart- in which the stream is natively stored on
> DV tape.
>
> The DV stream is organized into 80-byte so-called DIF blocks; 150 of
> them form a DIF sequence; an NTSC frame comprises 10 sequences (120000
> bytes), a PAL one 12 (144000 bytes).
> Each DIF sequence has 135 proper video blocks (image data), 9
> interleaved audio blocks, the remaining 6 being:
> 1 header block
> 2 subcode blocks, where timecode resides
> 3 VAUX blocks, where date/time is recorded, besides other data
>
> To reach the subcode and VAUX blocks I first look for 'data chunks'
> (terminology from MS "AVI RIFF File Reference"). In DV these are
> identified by a '##dc' FOURCC; in my D8 streams it's normally '00dc'.
> (Any decent hex editor will do the task)
>
> Eight bytes past the beginning of the FOURCC, the header block starts,
> identified by '1Fh'. 80 bytes beyond, the first subcode block begins
> with '3Fh'. Here you can find the recording timecode in the '13h'
> field with the format 'frame-second-minute-hour' (you have to subtract
> 40h, 80h, 80h and C0h respectively to get them in decimal values -BCD
> really)
>
> The VAUX blocks start with a '5Xh' identifier. I've seen written
> somewhere that it should be '5Fh', but my SONY produces other
> identifiers -always starting with 5. Here you'll go for the '62h' and
> '63h' fields, to find
>
> 62h: 'FF'-day-month-year (subtract C0h, E0h for day, month)
>
> 63h: 'FF'-second-minute-hour (treat as in timecode)
>
> Other fields in the VAUX give recording data -aperture, etc- I guess
> but have no yet experimented with them.
>
> Hope this helps. I'd recommend you to give a look at the 'libdv' free
> code. It's easily found through Google and can give interesting info
> to the curious.
>
> Julio