🚀 go-pugleaf

Hi Asger,
a ttime has two problems:
- it depends on the message system, it is not independent what happens on
the GUI ( that is the reason for the thread)
- the maximum resolution is 1/60 second
So this does not work for me.
Detlef
"Asger J�rgensen" <Asger.Pnotthis@AJ-World.dk> schrieb im Newsbeitrag
news:MPG.1a9574fc30494ef7989719@newsgroups.borland.com...
> Hi Detlef
>
>   In article <402b4f78$1@newsgroups.borland.com>,  Detlef says :
>
> > Hi all,
> > I'm using Win2K and like to communicate with a digital IO card with a
> > frequence of 200 Hz. I'm using a thread to send data to the card.
> > The problem is that windows supports only sleep timeslices of 10/15 ms (
> > depending on processor) or Sleep(0).
> > If I use Sleep( 0) my process uses a lot of processor time.
>
> if You set down the priority of the thread it shouldn't slow down
> the PC.
>
> > Is there a way to create events or sleeps with a resolution of  5 milli
> > seconds with an accuracy of +/- 1 milli second?
>
> Maybe You can use a TTimer, but if You want it to be very
> accurat You have to find one on the net.
>
> Best regards
> Asger