🚀 go-pugleaf

"Vladimir Afanasyev" <avv@systema.kiev.ua> wrote in message
news:3f2e026e@newsgroups.borland.com...
>
> Hi,
>
> A lot wrong:
>
> 1)You did not set port parameters: speed, parity, stopbits...,
> for example:
> gszPort = "COM2:9600,N,8,1";
> 2)You also did not create DCB.
>
Ok, i have modifed my code. Now it looks like this, but still there is
something wrong

String gszPort;
gszPort = "COM1";
DWORD dwRead, dwWritten;
HANDLE hComm;
DCB dcb;

hComm = CreateFile( gszPort.c_str (),
                    GENERIC_READ | GENERIC_WRITE,
                    0,
                    NULL,
                    OPEN_EXISTING,
                    0,
                    NULL);
if (hComm == INVALID_HANDLE_VALUE) {
        return;
        }
ZeroMemory(&dcb, sizeof(dcb));
dcb.DCBlength = sizeof (DCB);
GetCommState ( hComm, &dcb );

dcb.BaudRate = CBR_9600;
dcb.ByteSize = 8;
dcb.Parity   = NOPARITY;
dcb.StopBits = ONESTOPBIT;

if (!SetCommState ( hComm, &dcb)) {
    return;
    }
String szCommand = "AT^SMSO\r";   //Hayes code to turn off GSM device
if (!WriteFile( hComm, szCommand.c_str (), szCommand.Length (), &dwWritten,
NULL ))
    WriteLog ("Error: "+String(GetLastError ()), 0);
CloseHandle (hComm);

i dont receive errors but nothing happend when executed