🚀 go-pugleaf

On Fri, 3 Feb 2006 11:04:06 +1100, "Rob Evans"
<robe@fast.fujitsu.com.au> wrote:

>I've downloaded Patch #12 for StarTeam Server 2005 R2/8.0 and the
>readme says (in red letters):
>"This patch has a prerequisite of a StarTeam Server build 8.0.172.
>This patch will only install if 8.0.172 was previously installed."
>
>The build I previously downloaded and installed, and the one on the
>CDs I've received, is 8.0.168.
>
>I've now downloaded build 8.0.172 of Server and Client for Windows,
>along with other more recent builds for the Cross-Platform Clients.
>
>My question is:
>Is it alright to install build 8.0.172 over the top of build 8.0.168?
>
>Regards, Rob E.
>

Where did you find patches to download? I didn't see any on the
StarTeam downloads page.

I'd also like an answer to your questions. Anyone?

I have a watch set on StarTeam on the Borland Support Site, and that
notified me of the patch.

Patches are found in Downloads under http://support.borland.com (not
under www.borland.com - that's where I found Build 8.0.172)

I also asked the question of Borland Support and got the following
answer:

Build 8.0.172 is a full installation of ST server and does not require
any server upgrade. You do not need to uninstall the existing build
you have. Please follow these steps:

1. Shutdown StarTeam Server 2005 R2 configurations and close Server
Tools.

2. Backup the database and repository as given in the Appendix C of
the StarTeam Administration Guide.

3. Restore the back up on a test machine and test to ensure the backup
was fine.

4.  Install the build 8.0.172. You do not need to uninstall the
existing server build. You can install the latest released build on
top of what you have. This allows to make sure that you receive all
the latest stored procedures that were released along with the code
changes.

5. Install patch #12

6. Restart StarTeam Server 2005 R2 configurations

I haven't yet tried this out, as it involves taking StarTeam off line
for some time, but I hope to check it out on my test environment soon.
I'll notify Borland and this newsgroup of my results.

Regards, Rob E.

"Leroy Casterline" <casterle@ccltd.com> wrote in message
news:8fhpu1tliek2ujtvluicmnb46tiqjo3bgv@4ax.com...
> On Fri, 3 Feb 2006 11:04:06 +1100, "Rob Evans"
> <robe@fast.fujitsu.com.au> wrote:
>
> >I've downloaded Patch #12 for StarTeam Server 2005 R2/8.0 and the
> >readme says (in red letters):
> >"This patch has a prerequisite of a StarTeam Server build 8.0.172.
> >This patch will only install if 8.0.172 was previously installed."
> >
> >The build I previously downloaded and installed, and the one on the
> >CDs I've received, is 8.0.168.
> >
> >I've now downloaded build 8.0.172 of Server and Client for Windows,
> >along with other more recent builds for the Cross-Platform Clients.

> >
> >My question is:
> >Is it alright to install build 8.0.172 over the top of build
8.0.168?
> >
> >Regards, Rob E.
> >
>
> Where did you find patches to download? I didn't see any on the
> StarTeam downloads page.
>
> I'd also like an answer to your questions. Anyone?

On Mon, 13 Feb 2006 11:01:20 +1100, "Rob Evans"
<robe@fast.fujitsu.com.au> wrote:

>I have a watch set on StarTeam on the Borland Support Site, and that
>notified me of the patch.

Thank you, Rob!

I've followed the process on my test environment and all appeared to
go well. So, I'm happy with the result!
Regards, Rob E.

"Rob Evans" <robe@fast.fujitsu.com.au> wrote in message
news:43efcbb8$2@newsgroups.borland.com...
> I have a watch set on StarTeam on the Borland Support Site, and that
> notified me of the patch.
>
> Patches are found in Downloads under http://support.borland.com (not
> under www.borland.com - that's where I found Build 8.0.172)
>
> I also asked the question of Borland Support and got the following
> answer:
>
> Build 8.0.172 is a full installation of ST server and does not
require
> any server upgrade. You do not need to uninstall the existing build
> you have. Please follow these steps:
>
> 1. Shutdown StarTeam Server 2005 R2 configurations and close Server
> Tools.
>
> 2. Backup the database and repository as given in the Appendix C of
> the StarTeam Administration Guide.
>
> 3. Restore the back up on a test machine and test to ensure the
backup
> was fine.
>
> 4.  Install the build 8.0.172. You do not need to uninstall the
> existing server build. You can install the latest released build on
> top of what you have. This allows to make sure that you receive all
> the latest stored procedures that were released along with the code
> changes.
>
> 5. Install patch #12
>
> 6. Restart StarTeam Server 2005 R2 configurations
>
> I haven't yet tried this out, as it involves taking StarTeam off
line
> for some time, but I hope to check it out on my test environment
soon.
> I'll notify Borland and this newsgroup of my results.
>
> Regards, Rob E.
>
> "Leroy Casterline" <casterle@ccltd.com> wrote in message
> news:8fhpu1tliek2ujtvluicmnb46tiqjo3bgv@4ax.com...
> > On Fri, 3 Feb 2006 11:04:06 +1100, "Rob Evans"
> > <robe@fast.fujitsu.com.au> wrote:
> >
> > >I've downloaded Patch #12 for StarTeam Server 2005 R2/8.0 and the
> > >readme says (in red letters):
> > >"This patch has a prerequisite of a StarTeam Server build
8.0.172.
> > >This patch will only install if 8.0.172 was previously
installed."
> > >
> > >The build I previously downloaded and installed, and the one on
the
> > >CDs I've received, is 8.0.168.
> > >
> > >I've now downloaded build 8.0.172 of Server and Client for
Windows,
> > >along with other more recent builds for the Cross-Platform
Clients.
>
> > >
> > >My question is:
> > >Is it alright to install build 8.0.172 over the top of build
> 8.0.168?
> > >
> > >Regards, Rob E.
> > >
> >
> > Where did you find patches to download? I didn't see any on the
> > StarTeam downloads page.
> >
> > I'd also like an answer to your questions. Anyone?
>
>
>