🚀 go-pugleaf

I have had the same thing happen (as have most IB users) and I run IIS
3 & 4 servers.  When the agent(s) show as busy like that, check your
system cpu utilization and most likely you will see that it is pegged
at 100% with most if the processor going to one agent.  There
currently does not appear to be anything that can be done about it
other than reset the system.  Your only automated hope (that I know
of) would be to have someone write a program to monitor the cpu usage
to see if it pegs at 100% for a time (two minutes should do it) and
then either reset the system or call "shutdown.exe" to reset the
system for you.  You can then install it as an auto-start service.
You will have to wait a couple of minutes because many things
(including IB) can cause the cpu to peg at 100% for a few seconds.

Sorry, that is the best I can offer at this time.  If you do write a
program to do that, please feel free to post it here.  I am sure that
others would find it helpful too.
 
On Mon, 07 Sep 1998 16:48:07 +0200, Peter Cingel
<cingel@jfmed.uniba.sk> wrote:

>Hi there,
>Our IB server is running with Fast Track. Very often, an IB Agent
>reports "Busy" and dosn't work at all, until the server would restarted.
>Even the whole system works apparently slowly when the IB agent(s)
>is(are) busy. The problem encountered randomly, and when just the simple
>task is running.
>Could I do something to restart the busy IB Agent automaticaly? Please
>help me, what should I do.
>Please advice soonest.
>
>Peter Cingel
>Jessenius Faculty of Medicine, CU
>Martin
>Slovak Republic
>

It has never happend to me after I got 1.5 pro and start using IIS
8 month ago..

Bernt
Nettsenteret


Todd W. Baum wrote:

> I have had the same thing happen (as have most IB users) and I run IIS
> 3 & 4 servers.  When the agent(s) show as busy like that, check your
> system cpu utilization and most likely you will see that it is pegged
> at 100% with most if the processor going to one agent.  There
> currently does not appear to be anything that can be done about it
> other than reset the system.  Your only automated hope (that I know
> of) would be to have someone write a program to monitor the cpu usage
> to see if it pegs at 100% for a time (two minutes should do it) and
> then either reset the system or call "shutdown.exe" to reset the
> system for you.  You can then install it as an auto-start service.
> You will have to wait a couple of minutes because many things
> (including IB) can cause the cpu to peg at 100% for a few seconds.
>
> Sorry, that is the best I can offer at this time.  If you do write a
> program to do that, please feel free to post it here.  I am sure that
> others would find it helpful too.
>
> On Mon, 07 Sep 1998 16:48:07 +0200, Peter Cingel
> <cingel@jfmed.uniba.sk> wrote:
>
> >Hi there,
> >Our IB server is running with Fast Track. Very often, an IB Agent
> >reports "Busy" and dosn't work at all, until the server would restarted.
> >Even the whole system works apparently slowly when the IB agent(s)
> >is(are) busy. The problem encountered randomly, and when just the simple
> >task is running.
> >Could I do something to restart the busy IB Agent automaticaly? Please
> >help me, what should I do.
> >Please advice soonest.
> >
> >Peter Cingel
> >Jessenius Faculty of Medicine, CU
> >Martin
> >Slovak Republic
> >

I am also using the 1.5 version and as far as this particular problem
is concerned, it has made no difference.

Todd W. Baum
--- --- ---
Remove the "XX_" from the reply address to send me e-mail.
--- --- ---